| No. | Brand | J | F | f | T | A | s | S | r |
| 22217-EKC3W33 | SKF | - | - | - | - | - | - | - | - |
| 35BG05S16G-2DL | Nachi | - | - | - | - | - | - | - | - |
| NNCL-4914V | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 121341J | DAIKIN | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| 16-0-1 | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 6310ZZC3 | - | - | - | - | - | - | - | - | - |
| RCTS33SA3 | koyo | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 4074 | - | - | - | - | - | - | - | - | - |
| 020.40.1800 | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 9800W | - | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| R0632-025-00 | Rexroth | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| 6way | - | - | - | - | - | - | - | - | - |
| 61803.2RSR | fag | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| AH3234,AH3234G Withdrawal Sleeve(matched Bearing:23234CCK/W33) | B:105 mm; Design (sliding contact surface combination):Steel/steel; Basic static load rating C0:6800 kN; C:80 mm; d:160 mm; D:230 mm; b:13.5 mm; rb max.:1 mm; da max.:170 mm; da min.:169.5 mm; |
| TMDT 2-33 Right Angle Surface Probe | Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; B:8mm; Clearance:Standard; d:12mm; Static Load Rating (kN):6.4; SKU:2mm9101wicrdum-timke; Speed Rating (r/min):57300; Dynamic Load Rating (kN):2.9; |
| CP7170215 Thrust Plate 170x213.5x7mm | Basic static load rating C0:670 kN; Mass support roller:22.5 kg; Maximum dynamic radial loads Fr max.:480 kN; D:220 mm; Maximum static radial loads F0r max.:680 kN; Fatigue load limit Pu:83 kN; d:90 mm; Basic dynamic load rating C:468 kN; Limiting speed:430 r/min; r, r3,4 min.:2.5 mm; |
| AH315G Withdrawal Sleeve(matched Bearing:2215K, 1315K, 22215EK,21315CCK, C2215K, C2215KV) | SKU:23128-e1-k-tvpb-c3-q; Availability:In Stock; d:140mm; B:68mm; Weight:0.02 KGS; Clearance:C3; D:225mm; Seals or Shields:Open Type; Cage Type:Plastic; |
| TKTL 20 Infrared Thermometer | SKU:22309eae4c3-nsk; Cage Type:Steel; Availability:In Stock; D:100mm; Oil Limiting Speed (r/min):5300; d:45mm; Clearance:C3; Dynamic Load Rating (kN):166; B:36mm; Static Load Rating (kN):195; |
| 87631 / CR87631 Stainless Speedi Sleeve For Shaft Repair | SKU:23248-e1-qbl; D:440mm; d:240mm; Weight:0.02 KGS; B:160mm; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Steel; Clearance:Standard; |
| ZM100 Precision Locknut (M100x2)x130x20mm | Fatigue Load Rating (kN):0.35; d:30mm; Weight:0.26 KGS; SKU:2206etn9/w64-skf; Dynamic Load Rating (kN):23.8; Static Load Rating (kN):6.7; Cage Type:Plastic; Reference Speed Rating (r/min):22000; Clearance:Standard; Limiting Speed Rating (r/min):15000; |
| HMV31E / HMV 31E Hydraulic Nut (M155x3)x226x46mm | Basic Dynamic Radial Load Rating C:88000 N; d:50.000 mm; D:130.0000 mm; Grease Speed Rating Open/Shielded n1:4400 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5400 rpm; B:31.00 mm; Basic Static Radial Load Rating Co:71000 N; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
AOH30/750 (230/750CAK,230/750CCK,230/750CAK/W33, C30/750KMB Bearing Withdrawal Sleeve) Video