| No. | Brand | J | F | f | T | A | s | S | r |
| 26n | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 3/8" | Parker | - | - | - | 98 mm | - | - | - | - |
| 6001C3 | SKF | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| #HR32207J | NSK | - | - | - | - | - | - | - | - |
| BH-1614 | koyo | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 25% | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| ,I010 | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| NF-422 | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| (6315) | Timken | - | - | - | - | - | - | - | - |
| (1M2) | - | - | - | - | - | - | - | - | - |
| 6315 | FAFNIR | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 12125-02-9 | - | - | - | - | - | - | - | - | - |
| HMVC14E | SKF | - | - | - | - | - | - | - | - |
| F12 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 25 | - | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| 24lbs | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| TRB3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x1.6mm | d:50.000 mm; Basic Dynamic Radial Load Rating:43600 N; Width C:27 mm; B:62.00 mm; D:110.0000 mm; Fillet Radius ra:2.00 mm; Grease or Oil Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:14000 N; |
| AS6085 Thrust Needle Roller Bearing Washer 60x85x1mm | Clearance:Standard; B:16mm; Dynamic Load Rating (kN):21.8; Seals or Shields:Open Type; d:50mm; Cage Type:Steel; D:80mm; Fatigue Load Rating (kN):--; Weight:0.02 KGS; Static Load Rating (kN):16.6; |
| TRD1018 Thrust Bearing Ring / Thrust Needle Bearing Washer 15.875x28.575x3.2mm | B:38mm; Dynamic Load Rating (kN):144; D:200mm; Grease Limiting Speed (r/min):2800; Weight:4.45 KGS; SKU:6222-nsk; Clearance:Standard; Availability:In Stock; Oil Limiting Speed (r/min):3400; d:110mm; |
| AH3156G Withdrawal Sleeve Supplier | Weight:0.02 KGS; Availability:In Stock; Clearance:C3; B:98mm; Seals or Shields:Open Type; D:360mm; d:200mm; Cage Type:Steel; SKU:24140cck30/c3w33-qbl; |
| 84510 / CR84510 Stainless Speedi Sleeve For Shaft Repair | B:98mm; d:200mm; Limiting Speed Rating (r/min):1500; Reference Speed Rating (r/min):1700; Availability:In Stock; Seals or Shields:Open Type; D:360mm; Weight:41.70 KGS; Static Load Rating (kN):2010; Clearance:C3; |
| EAZ 180 Induction Heater | Oil Limiting Speed (r/min):12000; Fatigue Load Rating (kN):3.05; D:150mm; Grease Limiting Speed (r/min):8000; Preload:Light; Cage Type:Plastic; B:24mm; Clearance:Standard; Static Load Rating (kN):80; d:100mm; |
| 65 mm x 120 mm x 31 mm ZM15 Precision Locknut (M15x1)x25x8mm | Mass rod end:0.34 kg; B:16 mm; l4 max.:106 mm; d:20 mm; G:M 20x1.5; C1 max.:13.5 mm; r1 min.:0.3 mm; d4 ≈:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:30 kN; Size (mm):65 mm x 120 mm x 31 mm ; |
| CPR14150250 Thrust Plate 150x250x14mm | da max.:36 mm; db min.:37 mm; Da min.:48 mm; C:13 mm; Calculation factor Y0:0.8; D:55 mm; Reference speed:10000 r/min; a:13.165 mm; Basic static load rating C0:44 kN; rb max.:1 mm; |
AOH241/710 (241/710ECAK30/W33, 241/710CCK, 241/710CAK, 241/710CCK/W33 Bearing Withdrawal Sleeve) Video