| No. | Brand | J | F | f | T | A | s | S | r |
| (10)MR95ZZ | - | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| RW117 | Timken | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 37X13.50R20 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| GS81156 | INA | - | - | - | - | - | - | - | - |
| Dh220 | - | - | - | - | - | - | - | 4.763 mm | - |
| 2019 | - | - | 1391 mm | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| LiFePO4 | - | - | - | - | - | - | - | - | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 1864 | - | - | - | - | - | - | - | - | - |
| 5gallon | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| H2EWXBBL53B | Parker | - | - | - | - | - | - | - | - |
| CR99193 Stainless Steel Speedi Sleeve For Shaft Repair | PG:1/4 NPT; Mass pillow block:62.8 kg; Labyrinth ring:2 x LOR 108; H1:152.4 mm; P90°:113 kN; h:63.5 mm; Ca:89.789 mm; P120°:73.8 kN; da:98.425 mm; L:466.725 mm; |
| HMV54E / HMV 54E Hydraulic Nut 272x368x57mm | Grease Speed Rating Open/Shielded n1:850 rpm; Fillet Radius ra:2.50 mm; d:480.000 mm; B:56.00 mm; Basic Dynamic Radial Load Rating C:325000 N; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:1000 rpm; Accessories:Two Seals; D:600.0000 mm; Basic Static Radial Load Rating Co:560000 N; |
| FTRA4565 Thrust Bearing Ring / Thrust Needle Bearing Washer 45x65x1mm | G:M 55x2; d:55 mm; B:14 mm; d1:50 mm; Hydraulic nut:HMV 11 E; B1:45 mm; Lock nut:KMFE 11; Mass adapter sleeve assembly:0.34 kg; d3:75 mm; |
| AOHX241/600 (241/600CAK, 241/600CCK, 241/600ECAK30/W33 Bearing Withdrawal Sleeve) | Static Load Rating (kN):66; Availability:In Stock; d:105mm; D:160mm; B:26mm; Weight:1.58 KGS; Cage Type:Steel; Dynamic Load Rating (kN):72.5; Seals or Shields:Two Rubber Seals; Clearance:C3; |
| AOH240/1060 (240/1060CAK, 240/1060CCK, 240/1060CCK/W33, 240/1060CAK30F/W33 Bearing Withdrawal Sleeve) | Fillet Radius ra:1.00 mm; d:17.000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:12700 N; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:21600 N; Oil Speed Rating n2:14000 rpm; Sealed Speed Rating n3:11000 rpm; D:47.0000 mm; B:22.20 mm; |
| TMHS 75 Hydraulic Spindle | RG:1/2 NPT; P120°:73.8 kN; J max.:406.4 mm; Cap bolt, SAE grade:8; R1:79.375 mm; J min.:371.475 mm; Appropriate attachment bolt size G:0.875 in; h:56.356 mm; J1:82.55 mm; ba:56.356 mm; |
| 99550 / CR 99550 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; B:23mm; D:72mm; SKU:2207etn9-qbl; d:35mm; Availability:In Stock; Seals or Shields:Open Type; Clearance:Standard; Cage Type:Plastic; |
| 99322 / CR99322 Stainless Speedi Sleeve For Shaft Repair | Calculation factor e:0.43; Comparative axial load rating CFa:254 kN; r3,4 min.:6.4 mm; Basic dynamic load rating C:5700 kN; Design variant/feature:TQON/GW; Thrust factor K:1.4; Basic static load rating C0:13200 kN; Calculation factor Y2:2.3; D1 ≈:498 mm; Comparative radial load rating CF:1220 kN; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
AOH31/560 (231/560CAK/W33, C31/560KMB, 231/560CAK, 231/560CCK Bearing Withdrawal Sleeve) Video