| No. | Brand | J | F | f | T | A | s | S | r |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | 3.175 mm | - |
| N21% | - | - | - | - | - | - | - | - | - |
| NU2316 | - | - | - | 8 mm | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| 5gallon | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | - | - |
| 86 | SKF | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| 3-19mm | - | - | - | - | - | - | - | - | - |
| Rhb306 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| NUTR203/3AS | NTN | - | - | - | - | - | - | - | - |
| 500 | - | - | - | - | - | - | - | - | - |
| 3026 | - | - | - | - | - | - | - | - | - |
| L7054380253 | Parker | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| GAC80S | SKF | - | - | - | - | - | - | - | - |
| TMDT 2-32 Insulated Surface Probe | D:420.0000 mm; Sealed Speed Rating n3:890 rpm; d:280.000 mm; Accessories:Two Seals; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1700 rpm; Basic Dynamic Radial Load Rating C:302000 N; Grease Speed Rating Open/Shielded n1:1400 rpm; Basic Static Radial Load Rating Co:405000 N; B:65.00 mm; |
| CR99162 Stainless Steel Speedi Sleeve For Shaft Repair | T:196.85 mm; Design variant/feature:TDI/Y2; B:196.85 mm; Mass bearing:235 kg; r3,4 min.:6.4 mm; Calculation factor Y2:2.9; Comparative radial load rating CF:1060 kN; Fatigue load limit Pu:815 kN; D1 ≈:670 mm; d1 ≈:598 mm; |
| CP7180225 Thrust Plate 180x223.5x7mm | Clearance:C3; SKU:6216c3-nsk; Oil Limiting Speed (r/min):5300; Dynamic Load Rating (kN):72.5; Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):53; d:80mm; Availability:In Stock; D:140mm; |
| 99550 / CR 99550 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; B:23mm; D:72mm; SKU:2207etn9-qbl; d:35mm; Availability:In Stock; Seals or Shields:Open Type; Clearance:Standard; Cage Type:Plastic; |
| 87070 / CR87070 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Clearance:Standard; Weight:0.02 KGS; D:8.125 Inch; d:3.5 Inch; B:1.75 Inch; Seals or Shields:Open Type; SKU:ams28-skf; |
| MSR40x1.5 Precision Locknut / MSR-M40x1.5 Locking Nut (M40x1.5)x58x22mm | Thrust factor K:1.99; Basic static load rating C0:22400 kN; Calculation factor Y2:3.4; Calculation factor Y1:2.3; B:450 mm; T:450 mm; d1 ≈:510 mm; D:660 mm; Comparative radial load rating CF:2320 kN; r3,4 min.:6 mm; |
| 90809 / CR90809 Stainless Speedi Sleeve For Shaft Repair | d:360mm; SKU:23072-e1a-mb1-fag; Seals or Shields:Open Type; D:540mm; Reference Speed Rating (r/min):800; B:134mm; Limiting Speed Rating (r/min):1400; Static Load Rating (kN):4650; Dynamic Load Rating (kN):2800; Cage Type:Brass; |
| 90143 / CR90143 Stainless Speedi Sleeve For Shaft Repair | d:170mm; B:110mm; Static Load Rating (kN):2200; Limiting Speed Rating (r/min):1100; Availability:In Stock; Dynamic Load Rating (kN):1660; Cage Type:Brass; Clearance:Standard; Seals or Shields:Open Type; SKU:23234emw33w22-timken; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AOH24096 (24096ECAK30/W33, 24096CCK, 24096CAK Bearing Withdrawal Sleeve) Video