| No. | Brand | J | F | f | T | A | s | S | r |
| (50W | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| 2200lm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 30313A | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| (NH4)2SO4 | - | - | - | - | - | - | - | - | - |
| 100lm/W | - | - | - | - | - | - | - | - | - |
| 32213JR | INA | - | - | - | - | - | - | - | - |
| 1-11281037-0 | - | - | - | - | - | - | - | - | - |
| ALL72281 | Timken | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| NJ218ECM | SKF | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| KTB531 | - | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| C6908V | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| AS0414 Thrust Needle Roller Bearing Washer 4x14x1mm | d:100mm; Availability:In Stock; Cage Type:Brass; B:52mm; Seals or Shields:Open Type; Clearance:C4; SKU:23120-e1a-m-c4-qbl; D:165mm; Weight:0.02 KGS; |
| CP32035 Thrust Plate 20x34.5x3mm | Static Load Rating (kN):15; Dynamic Load Rating (kN):26.7; B:19mm; Clearance:Standard; D:72mm; SKU:6306zznr-nsk; Fatigue Load Rating (kN):--; Seals or Shields:Two Metal Shields; Limiting Speed Rating (r/min):9500; Availability:In Stock; |
| CPR985150 Thrust Plate 85x150x9mm | Mass bearing:0.32 kg; db min.:73 mm; Basic static load rating C0:80 kN; Calculation factor e:0.35; ra max.:1 mm; B:17 mm; r1,2 min.:1 mm; d1 ≈:78.8 mm; Reference speed:5600 r/min; C:14 mm; |
| 99726 / CR99726 Stainless Speedi Sleeve For Shaft Repair | d:320mm; Weight:77.40 KGS; SKU:23064embw507c08c4-ti; B:121mm; Cage Type:Brass; D:480mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):2410; Static Load Rating (kN):3880; Limiting Speed Rating (r/min):880; |
| 1077600/SET Grease Gun | Fatigue load limit Pu:25 kN; da max.:145 mm; B:33 mm; s max.:4.7 mm; Basic dynamic load rating C:165 kN; Reference speed:3800 r/min; Da max.:191 mm; Limiting value e:0.2; r3,4 min.:1.1 mm; Limiting speed:5600 r/min; |
| 87500 / CR87500 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; B:38mm; d:110mm; Dynamic Load Rating (kN):88.4; Static Load Rating (kN):39; SKU:1222k/c3-skf; Reference Speed Rating (r/min):6700; Fatigue Load Rating (kN):1.6; D:200mm; Clearance:C3; |
| 90806 / CR90806 Stainless Speedi Sleeve For Shaft Repair | Basic dynamic load rating C:899 kN; D1 ≈:248 mm; ra max.:2.5 mm; B1:111 mm; Ba min.:15 mm; Fatigue load limit Pu:102 kN; Limiting speed:630 r/min; Da max.:256 mm; b:13.9 mm; db min.:160 mm; |
| TMST 3 Electronic Stethoscope | F:10 mm; B:10 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0037 kg; d:6 mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
AOHX3292G (23292CAK/W33, 23292CAK, 23292CCK Bearing Withdrawal Sleeve) Video