| No. | Brand | J | F | f | T | A | s | S | r |
| 18 | - | - | - | - | - | - | - | - | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 12/24V | - | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| R165149420 | Rexroth | - | - | - | - | - | - | - | - |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| Zdr10dp1-40b/75y | - | - | - | - | - | - | - | - | - |
| 62/22 | koyo | - | - | - | - | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| .25mm | - | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| LPVD140 | - | - | - | - | - | - | - | - | - |
| Mfj10-28yc | YUKEN | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 90/600 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 10.9 | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| s.201140 | - | - | - | - | - | - | - | - | - |
| AH24034 Withdrawal Sleeve(matched Bearing:24034CAK,24034CCK,24034CCK30/W33, C4034K30V) | Lock washer:MB 40; Appropriate attachment bolt, size G:30 mm; Mass housing:139 kg; ba min.:101 mm; Q180°:900 kN; s:12 mm; J:540 mm; P0°:3100 kN; L:640 mm; P90°:1900 kN; |
| HMV30E / HMV 30E Hydraulic Nut (M150x2)x220x46mm | B:87mm; Seals or Shields:Open Type; Weight:21.00 KGS; d:160mm; Clearance:Standard; Availability:In Stock; Cage Type:Brass; SKU:51332m-qbl; D:270mm; |
| FTRB6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x1.5mm | Weight:2.61 KGS; B:28mm; Availability:In Stock; Static Load Rating (kN):119.2; Dynamic Load Rating (kN):130.8; d:150mm; Cage Type:Plastic; Seals or Shields:Open Type; D:210mm; SKU:2mm9330wicrsul-timke; |
| AOH24088 (24088ECAK30/W33, 24088CAK, 24088CCK Bearing Withdrawal Sleeve | RG:1/4-28 UNF; Thread grub screw G2:M6; Bearing:YSPAG 207-107; Limiting speed:1100 r/min; Db1:87 mm; Recommended tightening torque for grub screw:7.4 N·m; L:118 mm; End cover:ECY 207; Basic dynamic load rating C:25.5 kN; A:34.5 mm; |
| 90800 / CR90800 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:0.30 mm; D:19.0000 mm; Basic Static Radial Load Rating Co:950 N; Accessories:One Seal; B:6.00 mm; Basic Dynamic Radial Load Rating C:2210 N; d:6.000 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; Grease Speed Rating Open/Shielded n1:36000 rpm; Sealed Speed Rating n3:26000 rpm; |
| AOH240/1000 (240/1000CAK, 240/1000CCK, 240/1000CCK/W33,240/1000CAK30F/W33 Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Seals or Shields:Non-Contact Seal; Availability:In Stock; Cage Type:Steel; Reference Speed Rating (r/min):--; Limiting Speed Rating (r/min):10000; d:20mm; Static Load Rating (kN):7.9; Dynamic Load Rating (kN):15.9; B:15mm; |
| FTRD5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x2.5mm | Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:143000 N; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:134000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; B:57.20 mm; d:60.000 mm; |
| TIH L77/MV Bearing Induction Heater | Availability:In Stock; Weight:0.02 KGS; B:120mm; d:220mm; SKU:23144-e1-qbl; Cage Type:Steel; Clearance:Standard; Seals or Shields:Open Type; D:370mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
AOH3084G(23084CAK/W33, C3084KM, 23084CAK, 23084CCK Bearing Withdrawal Sleeve Video