| No. | Brand | J | F | f | T | A | s | S | r |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| GAC80S | SKF | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| HPIB070 | - | - | - | - | - | - | - | - | - |
| GS905 | - | - | - | - | - | - | - | - | - |
| 1500 | fag | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 1-11281037-0 | - | - | - | - | - | - | - | - | - |
| 650 | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| AN14 | NTN | - | - | - | - | - | - | - | - |
| 1.5-2.5t/H | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 12X3w | - | - | - | - | - | - | - | - | - |
| 22309EAK | NSK | - | - | - | - | - | - | - | - |
| 20 | Rexroth | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | - | - |
| S44 | RBC | - | - | - | - | - | - | 4.763 mm | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 23128E1AXLMC4 | fag | - | - | - | - | - | - | - | - |
| 12" | - | - | - | - | - | - | - | - | - |
| 30% | - | - | - | - | - | 114.3 mm | - | - | - |
| rig,BMV630 | - | - | - | - | - | - | - | - | - |
| SK235 | - | - | - | - | - | - | - | - | - |
| PC120-3 | - | - | - | - | - | - | - | - | - |
| 3 | YUKEN | - | - | - | - | - | - | - | - |
| AH2336G Withdrawal Sleeve(matched Bearing:22336CAK/W33,22336CCK/W33) | PG:1/8 NPT; R1:53.181 mm; Bearing:22216 EK; Da:140 mm; R2:21.431 mm; ba:33.337 mm; Initial grease fill:87.885 g; Cap bolt recommended tightening torque:298.3 N·m; P150°:44.5 kN; Mass pillow block:21.8 kg; |
| TRB1427 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x42.85x1.6mm | Availability:In Stock; SKU:3205bnrtnc3-qbl; Cage Type:Plastic; Weight:0.02 KGS; Seals or Shields:Open Type; d:25mm; B:20.6mm; D:52mm; Clearance:C3; |
| 85844 / CR85844 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:110mm; SKU:6212c3-nsk; Dynamic Load Rating (kN):52.5; B:22mm; Clearance:C3; Fatigue Load Rating (kN):--; Cage Type:Steel; Static Load Rating (kN):36; Availability:In Stock; |
| TKTL 20 Infrared Thermometer | SKU:22309eae4c3-nsk; Cage Type:Steel; Availability:In Stock; D:100mm; Oil Limiting Speed (r/min):5300; d:45mm; Clearance:C3; Dynamic Load Rating (kN):166; B:36mm; Static Load Rating (kN):195; |
| 99799 / CR99799 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; SKU:7410bgam-skf; D:130mm; Dynamic Load Rating (kN):95.6; B:31mm; Fatigue Load Rating (kN):2.7; Cage Type:Brass; Reference Speed Rating (r/min):6300; Availability:In Stock; Static Load Rating (kN):64; |
| AOH24080(24080CACK30/W33, 24080CCK, 24080CAK Bearing Withdrawal Sleeve) | d:10.000 mm; Oil Speed Rating n2:80000 rpm; Basic Static Radial Load Rating Co:4550 N; Basic Dynamic Radial Load Rating C:8060 N; Fillet Radius rb:0.10 mm; Fillet Radius ra:0.30 mm; B:16.00 mm; Grease Speed Rating n1:55000 rpm; D:26.0000 mm; |
| FTRC1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x2mm | Clearance:Standard; Availability:In Stock; Preload:Medium; Grease Limiting Speed (r/min):63000; Cage Type:Plastic; Oil Limiting Speed (r/min):95000; Fatigue Load Rating (kN):0.048; D:21mm; Static Load Rating (kN):1.12; B:5mm; |
| CR99199 Stainless Steel Speedi Sleeve For Shaft Repair | Cage Type:Brass; Limiting Speed Rating (r/min):2700; Reference Speed Rating (r/min):3200; Dynamic Load Rating (kN):446; D:165mm; Availability:In Stock; Weight:4.40 KGS; Seals or Shields:Open Type; d:100mm; Static Load Rating (kN):583; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AOH3080G(23080CCK/W33, C3080KM, 23080CCK, 23080CAK Bearing Withdrawal Sleeve) Video