| No. | Brand | J | F | f | T | A | s | S | r |
| 25%Min | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 3200W | - | - | - | - | - | - | - | - | - |
| N202-E-TVP2 | fag | - | - | - | - | - | - | - | - |
| 520 | - | - | - | 8 mm | - | - | - | - | - |
| 35X80X21X28 | - | - | - | - | - | - | - | - | - |
| M16 | Thomson | - | - | - | - | - | - | - | - |
| 1220 | SKF | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| NA4908 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| NU2219-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| Hm705 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 80W | - | - | - | - | - | - | - | - | - |
| 23122 | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| rig,BMV630 | - | - | - | - | - | - | - | - | - |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| CR99092 Stainless Steel Speedi Sleeve For Shaft Repair | Comparative axial load rating CFa:1420 kN; Mass bearing:720 kg; r3,4 min.:9999 mm; Calculation factor Y0:0.8; T:304.8 mm; D:9999 mm; Calculation factor Y1:0.77; Calculation factor e:0.88; d:635 mm; B:304.8 mm; |
| CPR53060 Thrust Plate 30x60x5mm | Basic Dynamic Radial Load Rating C:52300 N; B:34.90 mm; D:80.0000 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:5600 rpm; Basic Static Radial Load Rating Co:48000 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm; Accessories:Two Seals & Snap-Rin; d:35.000 mm; |
| 310/630X2 Tapered Roller Bearing 630x920x135mm | Clearance:Standard; Fatigue Load Rating (kN):9.5; B:52mm; Reference Speed Rating (r/min):2400; Static Load Rating (kN):345; d:170mm; Cage Type:Brass; Dynamic Load Rating (kN):281; Availability:In Stock; Seals or Shields:Open Type; |
| VHIN 850 Bearing Induction Heater | Basic dynamic load rating C:8800 kN; b:22.3 mm; Da max.:887 mm; D:920 mm; B:355 mm; Mass bearing:930 kg; Calculation factor kr:0.33; D1 ≈:814 mm; Limiting speed:670 r/min; r1,2 min.:7.5 mm; |
| AH24128 Withdrawal Sleeve(matched Bearing:24128CCK30/W33, C4128K30V) | Cage Type:Plastic; d:20mm; Speed Rating (r/min):58680; B:12mm; D:42mm; Dynamic Load Rating (kN):3.33; Weight:0.06 KGS; SKU:2mmvc9104hxcrdul-tim; Availability:In Stock; Seals or Shields:Open Type; |
| 99387 / CR99387 Stainless Speedi Sleeve For Shaft Repair | d:80mm; Limiting Speed Rating (r/min):3400; Availability:In Stock; SKU:21316ejw33c4-timken; D:170mm; Reference Speed Rating (r/min):4100; B:39mm; Dynamic Load Rating (kN):363; Clearance:C4; Weight:4.20 KGS; |
| AHX3220 Withdrawal Sleeve(matched Bearing: 23220CCK/W33) | Basic Static Radial Load Rating Co:73500 N; Accessories:Seal & Snap-Ring; Grease Speed Rating Open/Shielded n1:3800 rpm; Sealed Speed Rating n3:2600 rpm; B:30.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:95600 N; Fillet Radius ra:2.00 mm; D:160.0000 mm; |
| 89948 / CR89948 Stainless Speedi Sleeve For Shaft Repair | d:55mm; Weight:0.71 KGS; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.54; Clearance:C3; Reference Speed Rating (r/min):14000; Limiting Speed Rating (r/min):9000; Cage Type:Plastic; SKU:1211ektn9/c3w64-skf; Availability:In Stock; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
AOH3164G(23164CCK/W33, C3164KM, 23164CCK, 23164CAK Bearing Withdrawal Lseeve) Video