| No. | Brand | J | F | f | T | A | s | S | r |
| GAC80S | SKF | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| AM119683 | John Deere | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| 140lm/W | - | - | - | - | - | - | - | - | - |
| (Zhr17) | - | - | - | - | - | - | - | - | - |
| (10) | - | - | - | - | - | - | - | - | - |
| 1214K | fag | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| 25%-40% | - | - | - | - | - | - | - | - | - |
| 6800RS | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| 2/M | Rexroth | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| A10Vo | Rexroth | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| 071N1151 | Danfoss | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| 30% | - | - | - | - | - | 114.3 mm | - | - | - |
| 7216 | - | - | - | - | - | - | - | - | - |
| 6m | - | - | - | - | - | - | - | - | - |
| CP2715 Thrust Plate 7x14.4x2mm | SKU:2mm9308wicrsum-timke; Seals or Shields:Open Type; Weight:0.11 KGS; d:40mm; Clearance:Standard; D:62mm; Cage Type:Plastic; Speed Rating (r/min):22400; B:12mm; Static Load Rating (kN):16; |
| CP47095 Thrust Plate 70x94.3x4mm | Reference Speed Rating (r/min):4500; Availability:In Stock; Fatigue Load Rating (kN):3; D:270mm; Seals or Shields:Open Type; d:220mm; Static Load Rating (kN):110; Dynamic Load Rating (kN):78; B:24mm; SKU:61844/c3-skf; |
| AH24128 Withdrawal Sleeve(matched Bearing:24128CCK30/W33, C4128K30V) | Cage Type:Plastic; d:20mm; Speed Rating (r/min):58680; B:12mm; D:42mm; Dynamic Load Rating (kN):3.33; Weight:0.06 KGS; SKU:2mmvc9104hxcrdul-tim; Availability:In Stock; Seals or Shields:Open Type; |
| AOH24052G (24052CCK30/W33, 24052CAK, 24052CCK Bearing Withdrawal Sleeve) | B:12mm; SKU:7908ctrdudmp3-nsk; Static Load Rating (kN):11.7; Cage Type:Plastic; Grease Limiting Speed (r/min):22600; D:62mm; Clearance:Standard; Preload:Medium; Availability:In Stock; Weight:0.11 KGS; |
| AH309 Withdrawal Sleeve 40x45x31mm | D:110mm; Limiting Speed Rating (r/min):6100; B:27mm; Fatigue Load Rating (kN):--; Cage Type:Steel; d:50mm; Static Load Rating (kN):38.3; Availability:In Stock; SKU:6310-zz/c3-koyo; Seals or Shields:Two Metal Shields; |
| TRE512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x4mm | Dw:2 mm; r1 max.:0.6 mm; r1,2 min.:0.2 mm; r2 max.:0.8 mm; Mass needle roller:0.44 g; Lw:17.8 mm; |
| TKES 10A Endoscope | d:85.000 mm; Basic Static Radial Load Rating Co:19600 N; Grease Speed Rating Open/Shielded n1:5300 rpm; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:19500 N; B:13.00 mm; Accessories:One Seal; |
| 86454 / CR86454 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:160mm; Oil Limiting Speed (r/min):3000; B:32.5mm; SKU:30218-ntn; d:90mm; Clearance:Standard; Condition:New; Dynamic Load Rating (kN):208; Availability:In Stock; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AOH24060G(24060CCK30/W33, 24060CAK, 24060CCK, 24060CAK/W33, C4060K,C4060K30M Bearing Withdrawal Sleeve) Video