| No. | Brand | J | F | f | T | A | s | S | r |
| Max40d | - | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| CL2B-KB106 | - | - | - | - | - | - | - | - | - |
| CAS108-80-5 | - | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 80% | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6206 | fag | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| T6DCM | - | - | - | - | - | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| 10-10-30 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 99438 / CR99438 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):93.5; Weight:0.02 KGS; Clearance:Standard; d:44.45mm; Oil Limiting Speed (r/min):5800; Grease Limiting Speed (r/min):4300; Cage Type:Steel; Static Load Rating (kN):125; D:88.9mm; Availability:In Stock; |
| FTRA2542 Thrust Bearing Ring / Thrust Needle Bearing Washer 25x42x1mm | B:102mm; Seals or Shields:Open Type; Cage Type:Brass; Static Load Rating (kN):1590; D:300mm; SKU:22328came4c3-nsk; Dynamic Load Rating (kN):1160; Grease Limiting Speed (r/min):1200; d:140mm; Oil Limiting Speed (r/min):1500; |
| AH3122 Withdrawal Sleeve 105x110x68mm | S:4.763 mm; Labyrinth ring:2 x LOR 584; Bearing:22244 CCK/W33; Bearing limiting speed:2000 r/min; End plug (suffix Y):EPR 23; Adapter sleeve assembly:SNW 44x7.1/2; Initial grease fill:2749.95 g; Eye bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:4284.4 N·m; P150°:236 kN; |
| Plummer Block Housings SNV180-F-L + 22317-K + H2317X300 + TCV617X300 | B:22mm; D:110mm; Availability:In Stock; Weight:0.02 KGS; Clearance:C3; Seals or Shields:Two Rubber Seals; Cage Type:Steel; d:60mm; SKU:6212-2rs/c3-qbl; |
| 55 x 3.937 Inch | 100 Millimeter x 0.827 Inch | 21 Millimeter AOH24156(24156CCK30/W33, 24156CCK, 24156CAK, 24156CAK/w33 Bearing Withdrawal Sleeve0 | Fatigue load limit Pu:1800 kN; Limiting speed:450 r/min; Basic dynamic load rating C:16000 kN; ra max.:8 mm; Operating clearance factor k2:0.094; d:750 mm; r1,2 min.:9.5 mm; Misalignment factor k1:0; D:1220 mm; Da min.:1025 mm; Size (mm):55 x 3.937 Inch | 100 Millimeter x 0.827 Inch | 21 Millimeter ; |
| CP917 Thrust Plate 9x16.4x0.8mm | Cage Type:Steel; Seals or Shields:Open Type; D:52mm; Availability:In Stock; d:25mm; SKU:2205kjc3-qbl; Clearance:C3; Weight:0.02 KGS; B:18mm; |
| 87914 / CR87914 Stainless Speedi Sleeve For Shaft Repair | D:400mm; SKU:23148-e1-k-qbl; Availability:In Stock; B:128mm; Clearance:Standard; Seals or Shields:Open Type; Weight:0.02 KGS; d:240mm; Cage Type:Steel; |
| FTRD5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x2.5mm | Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:143000 N; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:134000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; B:57.20 mm; d:60.000 mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
AOH3156G(23156CCK/W33, 23156CCK, 23156CAK, 23156CAK/W33,C3156K Bearing Withdrawal Sleeve) Video