| No. | Brand | J | F | f | T | A | s | S | r |
| 160.16.1424 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| GAC80S | SKF | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| ZAX330-3 | INA | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| SF-G02-060-15 | DAIKIN | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 150W | - | - | - | - | - | - | - | - | - |
| Jy-614 | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| LPVD140 | - | - | - | - | - | - | - | - | - |
| [2 | - | - | - | - | - | - | - | - | - |
| 9/12 | - | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| NNF5009-2LSNV | - | - | 108 mm | - | - | - | - | - | - |
| FTRA1226 Thrust Bearing Ring / Thrust Needle Bearing Washer 12x26x1mm | Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):774; Weight:10.20 KGS; Reference Speed Rating (r/min):3000; D:200mm; Dynamic Load Rating (kN):694; SKU:22319ejw33c4-timken; Availability:In Stock; d:95mm; |
| AH30/950 Withdrawal Sleeve 900x950x355mm | B:7mm; Weight:0.20 KGS; SKU:6810zz-nsk; Static Load Rating (kN):6200; D:65mm; Cage Type:Steel; Availability:In Stock; Grease Limiting Speed (r/min):9500; Dynamic Load Rating (kN):6400; Clearance:Standard; |
| FTRD6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x2.5mm | Basic dynamic load rating C:11000 kN; F:572.3 mm; Calculation factor kr:730; C:540 mm; Fatigue load limit Pu:2160 kN; D1 ≈:659 mm; d:485 mm; b:22.3 mm; Mass bearing:830 kg; K:12 mm; |
| TRD3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x3.2mm | da:176.213 mm; J1:95.25 mm; R1:104.775 mm; RG:3/4 NPT; P60°:345 kN; J min.:441.325 mm; Max. speed for PosiTrac Plus seal:825 r/min; P90°:207 kN; L:558.8 mm; PosiTrac Plus contact element:2 x B10724-155; |
| 99525 / CR 99525 Stainless Speedi Sleeve For Shaft Repair | SKU:xlj2.3/4-r&m; Availability:In Stock; Weight:0.20 KGS; d:2.75 inch; Clearance:Standard; D:4.125 inch; Seals or Shields:Open Type; B:0.688 inch; |
| 89949 / CR89949 Stainless Speedi Sleeve For Shaft Repair | A:4 mm; d1:340 mm; d:360 mm; B5:58 mm; Lock nut:HME 3072; B:45 mm; B1:144 mm; Hydraulic nut:HMV 72E; G2:M 6; G:Tr 360x5; |
| TMTP 200 General Purpose Thermometer | Availability:In Stock; SKU:23068embw507w84c08-t; Limiting Speed Rating (r/min):800; Reference Speed Rating (r/min):930; d:340mm; D:520mm; Weight:102.70 KGS; Dynamic Load Rating (kN):2890; Seals or Shields:Open Type; B:133mm; |
| 85973 / CR85973 Stainless Speedi Sleeve For Shaft Repair | B:13mm; Dynamic Load Rating (kN):18.1; D:80mm; Clearance:Standard; Grease Limiting Speed (r/min):14900; Static Load Rating (kN):16.8; Preload:Light; d:55mm; Availability:In Stock; Cage Type:Plastic; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AOH2344 Withdrawal Sleeve(matched:23244CCK/W33, 22344CCK/W33,23244CAK/W33, 22344CAK/W33 Bearing) Video