| No. | Brand | J | F | f | T | A | s | S | r |
| AM119683 | John Deere | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 660W | - | - | - | - | - | - | - | - | - |
| 4T-LM48548 | Bower | - | - | - | - | - | - | - | - |
| 24124-E1-C4 | fag | - | - | - | - | - | - | - | - |
| 2.2 | Dodge | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| L0098953B | Parker | - | - | - | - | - | - | - | - |
| NATR6-PP-A | INA | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| 40x90x23 | - | - | - | - | - | - | - | - | - |
| 60/120LEDs | - | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| D3W1CNYC | Parker | - | - | - | - | - | - | - | - |
| TMBP 20E Blind Housing Puller Kit | h:61.913 mm; H:398.462 mm; Stabilizing ring:SR-38-32; End plug (suffix Y):EPR 21; L:711.2 mm; N1:34.925 mm; Ca:101.803 mm; Cap bolt recommended tightening torque:1735.4 N·m; Da:339.999 mm; Cap bolt:1 1/8-7 UNC; |
| EAZ 179 Induction Heater | Static Load Rating (kN):7.65; d:30mm; Preload:Light; Dynamic Load Rating (kN):13.8; Weight:0.11 KGS; Seals or Shields:Open Type; SKU:7006acd/p4atbta-skf; B:13mm; D:55mm; Availability:In Stock; |
| 99350 / CR99350 Stainless Speedi Sleeve For Shaft Repair | SKU:6809dd-nsk; Availability:In Stock; Oil Limiting Speed (r/min):13000; d:45mm; B:7mm; Grease Limiting Speed (r/min):11000; Dynamic Load Rating (kN):6.6; D:58mm; Seals or Shields:Two Rubber Seals; Weight:0.20 KGS; |
| TRE4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x4mm | Adapter sleeve:OH 3064 H; Da:480 mm; bb:115.5 mm; H:591 mm; Oil level, min.:85 mm; J6:770 mm; Q150°:1650 kN; Ca:181 mm; Oil seal:TSD 3064 U; L:830 mm; |
| CPR81210 Thrust Plate 50x78x6.5mm | Cage Type:Steel; Reference Speed Rating (r/min):7000; D:32mm; Clearance:Standard; B:22mm; Dynamic Load Rating (kN):15.9; Limiting Speed Rating (r/min):10000; SKU:52202-skf; Minimum Load Factor:0.0038; Static Load Rating (kN):25; |
| EAZ 270 Induction Heater | SKU:30305a-qbl; B:0.7185inch; Weight:0.02 KGS; Availability:In Stock; D:2.44inch; d:0.984inch; Seals or Shields:Open Type; Clearance:Standard; |
| 15 mm x 35 mm x 11 mm AS75100 Thrust Needle Roller Bearing Washer 75x100x1mm | Basic Dynamic Radial Load Rating C:32500 N; Basic Static Radial Load Rating Co:25000 N; Accessories:Snap-Ring; d:60.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; B:18.00 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Sealed Speed Rating n3:4300 rpm; D:95.0000 mm; Size (mm):15 mm x 35 mm x 11 mm ; |
| TRD3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x3.2mm | H1:125 mm; Adapter sleeve:H 322 E; da:100 mm; P90°:410 kN; Appropriate attachment bolt, rec. tightening torque:665 N·m; Locating ring:2 x FRB 13,5/200; Pa:220 kN; N1:26 mm; Q120°:620 kN; Cap bolt, rec. tightening torque:200 N·m; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
AH3140 Withdrawal Sleeve(matched Bearing:23140CCK,23140CAK, 23140CCK/W33, C3140K) Video