| No. | Brand | J | F | f | T | A | s | S | r |
| SL02 | - | - | - | - | - | - | - | - | - |
| 6308 | INA | - | - | - | - | - | - | - | - |
| Ex200 | Hitachi | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| 6745-11-3102 | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| SMD1808 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| LiFePO4 | - | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| UG223HL | Link-Belt | - | - | - | - | - | - | - | - |
| CL2B-dB04 | - | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| XM1 | TOKIMEC | - | - | - | - | - | - | - | - |
| UC209D1 | NSK | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| GU10 | - | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 22213E | SKF | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| KTB531 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| 22224-E1A-M | fag | - | - | - | - | - | - | - | - |
| 52x | - | - | - | - | - | - | - | - | - |
| HMV46E / HMV 46E Hydraulic Nut 232x318x53mm | B:12.5 mm; Mass inner ring:0.0052 kg; F:13 mm; d:10 mm; r, r1,2 min.:0.3 mm; |
| 90809 / CR90809 Stainless Speedi Sleeve For Shaft Repair | d:360mm; SKU:23072-e1a-mb1-fag; Seals or Shields:Open Type; D:540mm; Reference Speed Rating (r/min):800; B:134mm; Limiting Speed Rating (r/min):1400; Static Load Rating (kN):4650; Dynamic Load Rating (kN):2800; Cage Type:Brass; |
| EAZ 244 Induction Heater | Housing:SAF 620; R2:30.163 mm; Bearing:1320 K; Cap bolt recommended tightening torque:1220 N·m; P120°:72.5 kN; L:419.1 mm; H1:133.35 mm; H:258.762 mm; da:84.138 mm; Adapter sleeve assembly:SNW 120x3.5/16; |
| 97064 / CR97064 Stainless Speedi Sleeve For Shaft Repair | SKU:6302-2zr-fag; Cage Type:Steel; Seals or Shields:Two Metal Shields; Fatigue Load Rating (kN):0.27; Dynamic Load Rating (kN):12; Static Load Rating (kN):5.3; d:15mm; Weight:0.02 KGS; Clearance:Standard; Limiting Speed Rating (r/min):20800; |
| MSR22x1.5 Precision Locknut / MSR-M22x1.5 Locking Nut (M22x1.5)x40x18mm | Weight:0.02 KGS; B:23mm; D:72mm; Cage Type:Steel; SKU:22207-e1-k-qbl; d:35mm; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; |
| 99291 / CR99291 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):19300; Oil Limiting Speed (r/min):13000; Seals or Shields:Two Rubber Seals; SKU:3204b-2rstn-nsk; Clearance:Standard; d:20mm; Static Load Rating (kN):12000; Grease Limiting Speed (r/min):9000; Cage Type:Plastic; Availability:In Stock; |
| TRD815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x3.2mm | da:38.1 mm; A1:75.406 mm; Basic dynamic load rating C:73.8 kN; d2:62.706 mm; B:69.85 mm; S:0.794 mm; Mass bearing unit:3.63 kg; A:60.325 mm; s:25.4 mm; H1:53.975 mm; |
| AOH24088 (24088ECAK30/W33, 24088CAK, 24088CCK Bearing Withdrawal Sleeve | RG:1/4-28 UNF; Thread grub screw G2:M6; Bearing:YSPAG 207-107; Limiting speed:1100 r/min; Db1:87 mm; Recommended tightening torque for grub screw:7.4 N·m; L:118 mm; End cover:ECY 207; Basic dynamic load rating C:25.5 kN; A:34.5 mm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AH3136G Withdrawal Sleeve(matched Bearing:23136CCK,23136CAK,23136CCK/W33, 23136CAK/W33, C3136K) Video