| No. | Brand | J | F | f | T | A | s | S | r |
| 12/15/16/17/18/19mm | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 6002ZZE | Nachi | - | - | - | - | - | - | - | - |
| 07433-71103,07432-71201,07430-72201,07432-72101,07440-72202,07432-71203,07436-72202,07443-6710 | - | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| 1lb | - | - | - | - | - | - | - | - | - |
| 8'1" | - | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| QAR81788 | John Deere | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| 150lm/W | INA | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| T73T-1217 | - | - | - | - | - | - | - | - | - |
| (6D31) | - | - | 26.5 mm | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| BRG453 | - | - | - | - | - | - | - | - | - |
| CR99076 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Weight:0.02 KGS; Cage Type:Steel; D:75mm; Grease Limiting Speed (r/min):4800; Seals or Shields:Open Type; Static Load Rating (kN):76.5; d:45mm; Dynamic Load Rating (kN):57.5; SKU:32009xa-ntn; |
| 99726 / CR99726 Stainless Speedi Sleeve For Shaft Repair | d:320mm; Weight:77.40 KGS; SKU:23064embw507c08c4-ti; B:121mm; Cage Type:Brass; D:480mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):2410; Static Load Rating (kN):3880; Limiting Speed Rating (r/min):880; |
| AH3036 Withdrawal Sleeve(matched Bearing:23036CAK,23036CCK,23036CCK/W33, C3036K) | Cage Type:Plastic; Availability:In Stock; Weight:0.02 KGS; D:110mm; Dynamic Load Rating (kN):65; Grease Limiting Speed (r/min):5000; SKU:2310-2rstnc3-nsk; Seals or Shields:Two Rubber Seals; B:40mm; d:50mm; |
| FTRD4565 Thrust Bearing Ring / Thrust Needle Bearing Washer 45x65x2.5mm | Permissible sliding velocity v min.:0 m/s; D:190 mm; h:172 mm; d:170 mm; D1:205 mm; Mass bushing:5.4 kg; Permissible sliding velocity v max.:0.5 m/s; B:100 mm; Specific static load factor K0:45 N/mm²; B1:10 mm; |
| CP1.580105 Thrust Plate 80x104.3x1.5mm | Reference Speed Rating (r/min):870; Dynamic Load Rating (kN):2780; Cage Type:Steel; d:280mm; Clearance:C3; Weight:93.30 KGS; SKU:23156brw33c3-timken; Availability:In Stock; Seals or Shields:Open Type; Static Load Rating (kN):4170; |
| VHIN 850 Bearing Induction Heater | Basic dynamic load rating C:8800 kN; b:22.3 mm; Da max.:887 mm; D:920 mm; B:355 mm; Mass bearing:930 kg; Calculation factor kr:0.33; D1 ≈:814 mm; Limiting speed:670 r/min; r1,2 min.:7.5 mm; |
| AOH3044G Withdrawal Sleeve(matched:23044CAK,23044CCK, 23044CCK/W33, C3044K Bearing | D:560 mm; Minimum axial load factor A:5.8; Basic dynamic load rating C:1460 kN; ra max.:2 mm; B:24 mm; Basic static load rating C0:8500 kN; D1:464 mm; Limiting speed:600 r/min; d1:555 mm; Da max.:479 mm; |
| H312X Adapter Sleeve 55x80x47mm | Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):15; Weight:0.44 KGS; Dynamic Load Rating (kN):46.5; Grease Limiting Speed (r/min):2200; D:110mm; SKU:51117-nsk; Clearance:Standard; d:85mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
AH24034 Withdrawal Sleeve(matched Bearing:24034CAK,24034CCK,24034CCK30/W33, C4034K30V) Video