| No. | Brand | J | F | f | T | A | s | S | r |
| 513150 | Timken | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| 008BC | - | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| 6704ZZ | - | - | - | - | - | - | - | - | - |
| 2p | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| PartsSH100 | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 300-500kg/h | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| 36W | INA | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (50W | - | - | - | - | - | - | - | - | - |
| 52x | - | - | - | - | - | - | - | - | - |
| TIH L44/LV Bearing Induction Heater | B:55mm; SKU:2315k/c3-qbl; D:160mm; d:75mm; Cage Type:Steel; Weight:0.02 KGS; Availability:In Stock; Clearance:C3; Seals or Shields:Open Type; |
| 86404 / CR86404 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.225; D:40mm; Seals or Shields:Two Metal Shields; Clearance:Standard; Dynamic Load Rating (kN):10.1; SKU:6203-2zr-fag; Weight:0.02 KGS; Reference Speed Rating (r/min):18100; B:12mm; d:17mm; |
| CPR865115 Thrust Plate 65x115x8mm | Clearance:Standard; Static Load Rating (kN):40.4; Seals or Shields:Open Type; SKU:2mm208wicrsuh-timken; Availability:In Stock; B:18mm; D:80mm; Weight:0.35 KGS; d:40mm; Cage Type:Plastic; |
| TRB2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x1.6mm | da:74.612 mm; L:387.35 mm; A1:111.125 mm; Cap bolt, SAE grade:8; Cap bolt:2 x 3/4-10 UNC; J min.:295.275 mm; h:47.625 mm; P90°:56.5 kN; Mass pillow block:31.4 kg; H2:44.45 mm; |
| TRB2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x1.6mm | Db2:71 mm; J:70 mm; A1:12 mm; B1:33 mm; T:40 mm; Basic static load rating C0:7.8 kN; Fatigue load limit Pu:0.335 kN; Basic dynamic load rating C:14 kN; N4:4 mm; J6:83 mm; |
| 86543 / CR86543 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):1760; Availability:In Stock; B:74mm; Clearance:Standard; Static Load Rating (kN):1450; Limiting Speed Rating (r/min):2600; Fatigue Load Rating (kN):170; d:180mm; D:280mm; Seals or Shields:Open Type; |
| CP1730 Thrust Plate 17x29.5x0.8mm | Fatigue load limit Pu:600 kN; B:200 mm; d:400 mm; Design variant/feature:NN.1/W33; r1,2 min.:5 mm; Da max.:580 mm; Da min.:564 mm; s max.:4.5 mm; Calculation factor kr:0.28; Basic static load rating C0:7200 kN; |
| CP3552 Thrust Plate 35x51.5x0.8mm | B:29mm; SKU:21311-e1-tvpb-c3-qbl; Seals or Shields:Open Type; Availability:In Stock; d:55mm; D:120mm; Cage Type:Plastic; Clearance:C3; Weight:0.02 KGS; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
AH3032 Withdrawal Sleeve(matched Bearing:23032CCK/W33, 23032CAK/W33, C3032K) Video