| No. | Brand | J | F | f | T | A | s | S | r |
| 6303ZZ | - | - | - | - | - | - | - | - | - |
| 9e-1b40-0876-1105 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| F-53125.02.NUKR | INA | - | - | - | - | - | - | - | - |
| YF0-81530-62-03 | - | - | - | - | 279.4 mm | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| ZAXIS450 | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| NK20/20, | INA | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| UG223HL | Link-Belt | - | - | - | - | - | - | - | - |
| 960 | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| 6800RS | - | - | - | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| 3229210115 | Parker | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| VCL12F05A | Parker | - | - | - | - | - | - | - | - |
| 87530 / CR87530 Stainless Speedi Sleeve For Shaft Repair | D:280mm; Seals or Shields:Open Type; B:46mm; Static Load Rating (kN):244.4; Speed Rating (r/min):4200; Clearance:Standard; Cage Type:Plastic; Weight:9.25 KGS; d:180mm; Dynamic Load Rating (kN):262.4; |
| TMBS 150E Bearing Puller | PosiTrac Plus contact element:2 x B10724-109; Eye bolt:2 x 3/8-16 UNC; Da:200 mm; Appropriate attachment bolt size G:0.75 in; Housing:SAFS 522; Cap bolt, SAE grade:8; L:419.1 mm; H2:52.388 mm; Pa:17.3 kN; H1:125.425 mm; |
| AH309 Withdrawal Sleeve (22209EK Bearing) | Eye bolt:2 x 1/2-13 UNC; Da:339.999 mm; R1:120.65 mm; Stabilizing ring:SR-38-32; RG:1 NPT; N1:34.925 mm; L:711.2 mm; PG:1/4 NPT; Mass pillow block:217 kg; P90°:249 kN; |
| AH320 Withdrawal Sleeve 95x100x59mm | Weight:0.02 KGS; Availability:In Stock; d:80mm; Cage Type:Steel; Clearance:Standard; Seals or Shields:Open Type; B:39mm; SKU:21316-e1-qbl; D:170mm; |
| FTRD1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x2.5mm | K:4.5 mm; Recommended lock nut tightening angle α:130 °; Calculation factor Y0:1.8; d:80 mm; D1 ≈:150 mm; ra max.:2 mm; Da max.:158 mm; Calculation factor Y1:1.9; Calculation factor e:0.35; Basic dynamic load rating C:516 kN; |
| AOH241/850 (241/850CAK, 241/850CCK,241/850CCK/W33, 241/850ECAK30/W33 Bearing Withdrawal Sleeve) | J1:160 mm; Da:420 mm; Mass housing:221 kg; da:260 mm; P55°:4700 kN; Q120°:2860 kN; N4 max.:20 mm; Appropriate attachment bolt, size G:36 mm; Locating ring:6 x FRB 10/420; P180°:1900 kN; |
| FTRD85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x2.5mm | Limiting Speed Rating (r/min):26000; Reference Speed Rating (r/min):50000; Weight:0.02 KGS; Condition:New; Cage Type:Steel; Fatigue Load Rating (kN):0.132; Seals or Shields:Low Friction Seals; Availability:In Stock; SKU:6201-2rsl-skf; B:10mm; |
| FTRC4565 Thrust Bearing Ring / Thrust Needle Bearing Washer 45x65x2mm | SKU:23126emw33c3-timken; d:130mm; Availability:In Stock; Reference Speed Rating (r/min):2400; D:210mm; Clearance:C3; B:64mm; Seals or Shields:Open Type; Weight:8.60 KGS; Cage Type:Brass; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
AHX2324G Withdrawal Sleeve(matched Bearing:22324CCK/W33) Video