| No. | Brand | J | F | f | T | A | s | S | r |
| 2835 | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| (DM-9600) | - | - | - | - | - | - | - | - | - |
| 7216 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| 6063 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| s.201140 | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| 23996YMB | INA | - | - | - | - | - | - | - | - |
| 2017 | INA | - | - | - | - | - | - | - | - |
| 61804-2RS | INA | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| 7001140808 | INA | - | - | - | - | - | - | - | - |
| 1.11/16 | SKF | - | - | - | - | - | - | - | - |
| 595 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| NJ316 | NSK | - | - | - | - | - | - | - | - |
| 1-4/5" | - | - | - | - | - | - | - | - | - |
| 85191 / CR85191 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; B:4mm; d:4mm; Availability:In Stock; Cage Type:Steel; Weight:0.20 KGS; D:12mm; SKU:s604-2rs-zen; Clearance:Standard; |
| 90774 / CR90774 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Cage Type:Steel; SKU:22314ek/c4-qbl; Clearance:C4; B:51mm; d:70mm; D:150mm; Availability:In Stock; Weight:0.02 KGS; |
| AOH241/530G (241/530CAK, 241/530CCK, 241/530ECAK30/W33 Bearing Withdrawl Sleeve) | Grease Speed Rating n1:5000 rpm; Sealed Speed Rating n3:5000 rpm; B:39.70 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:67100 N; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.50 mm; Accessories:Shield & Seal; d:40.000 mm; Basic Static Radial Load Rating Co:65500 N; |
| 90075 / CR90075 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Preload:Light; Weight:0.02 KGS; Grease Limiting Speed (r/min):15400; B:19mm; D:85mm; Clearance:Standard; SKU:7209a5trsulp3-nsk; d:45mm; Availability:In Stock; |
| AH3138G Withdrawal Sleeve(matched Bearing:23138CCK,23138CAK, 23138CCK/W33, C3138K) | J min.:628.65 mm; H:474.663 mm; ba:90.487 mm; Da:399.999 mm; P90°:254 kN; Housing:SAF 244; A1:222.25 mm; A2:304.8 mm; N1:41.275 mm; P120°:160 kN; |
| AOH240/630G (240/630CAK, 240/630CCK, 240/630ECAK30/W33 Bearing Withdrawal Sleeve) | B:30 mm; K:3.5 mm; Basic dynamic load rating C:114 kN; D1 ≈:87 mm; da min.:75.2 mm; D:100 mm; Da max.:95 mm; Reference speed:3000 r/min; Basic static load rating C0:193 kN; d1 ≈:83 mm; |
| 99490 / CR 99490 Stainless Speedi Sleeve For Shaft Repair | Basic dynamic load rating C:2664 kN; Calculation factor e:0.31; K:9 mm; B4:39 mm; d2 ≈:301 mm; D1 ≈:380 mm; B1:190 mm; Reference speed:1100 r/min; Da max.:423 mm; d1:240 mm; |
| CP7140180 Thrust Plate 140x178.7x7mm | SKU:2212e-2rs1tn9-skf; D:110mm; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):31.2; Static Load Rating (kN):12.2; Availability:In Stock; Limiting Speed Rating (r/min):3800; Fatigue Load Rating (kN):0.62; B:28mm; Weight:0.02 KGS; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AHX3124 Withdrawal Sleeve(matched Bearing:23124CCK/W33, 22224EK, C2224K) Video