| No. | Brand | J | F | f | T | A | s | S | r |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 33205 | Timken | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| KC0 | - | - | - | - | - | - | - | 4.763 mm | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| [50pcs] | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | 350 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| F-53125.02.NUKR | INA | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| 99.7%Min | - | - | - | - | - | - | - | - | - |
| 3800 | - | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| 20-5-52/100ym | Rexroth | - | - | - | - | - | - | - | - |
| 801002 | - | - | - | - | - | - | - | - | - |
| C4032-2CS5V/GEM9 | - | - | - | - | - | - | - | - | - |
| MSR15x1 Precision Locknut / MSR-M15x1 Locking Nut (M15x1)x33x16mm | Reference Speed Rating (r/min):1420; B:100mm; Clearance:Standard; Availability:In Stock; Weight:23.10 KGS; Limiting Speed Rating (r/min):2200; Dynamic Load Rating (kN):1130; d:180mm; Fatigue Load Rating (kN):181; Static Load Rating (kN):1770; |
| 86429 / CR86429 Stainless Speedi Sleeve For Shaft Repair | SKU:6015 c3-timken; d:75mm; Limiting Speed Rating (r/min):6000; D:115mm; Cage Type:Steel; Weight:0.65 KGS; Static Load Rating (kN):33.1; Seals or Shields:Open Type; Availability:In Stock; Reference Speed Rating (r/min):8700; |
| 86486 / CR86486 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:20800 N; d:25.000 mm; B:22.20 mm; Accessories:One Seal; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8000 rpm; Oil Speed Rating n2:11000 rpm; D:52.0000 mm; Grease Speed Rating n1:8000 rpm; Basic Static Radial Load Rating Co:14000 N; |
| CPR12120210 Thrust Plate 120x210x12mm | Seals or Shields:Open Type; B:20mm; Availability:In Stock; Cage Type:Steel; d:30mm; D:62mm; SKU:2206kj-qbl; Weight:0.02 KGS; Clearance:Standard; |
| AH226 Withdrawal Sleeve 125x130x53mm | Dynamic Load Rating (kN):255; d:190mm; Reference Speed Rating (r/min):2600; SKU:6238-m-c3-fag; Fatigue Load Rating (kN):11.6; Availability:In Stock; Clearance:C3; Weight:22.60 KGS; Cage Type:Brass; Seals or Shields:Open Type; |
| AS2035 Thrust Needle Roller Bearing Washer 20x35x1mm | Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:2900 N; B:9.00 mm; Basic Dynamic Radial Load Rating C:5400 N; Grease Speed Rating n1:22000 rpm; Oil Speed Rating n2:28000 rpm; d:15.000 mm; D:32.0000 mm; |
| TRD3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x3.2mm | Dynamic Load Rating (kN):245; B:33mm; Weight:2.10 KGS; Availability:In Stock; Cage Type:Brass; Reference Speed Rating (r/min):4400; Seals or Shields:Open Type; D:140mm; Clearance:C3; Static Load Rating (kN):263; |
| AOHX3092G (23092CAK/W33, C3092KM, 23092CAK, 23092CCK Bearing Withdrawal Sleeve) | Availability:In Stock; Cage Type:Plastic; Weight:0.41 KGS; Dynamic Load Rating (kN):33.2; Seals or Shields:Open Type; Clearance:Standard; SKU:3mm9112wicrdul-timke; B:18mm; d:60mm; D:95mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
AH24122 Withdrawal Sleeve(matched Bearing:24122CCK30/W33, C4122K30V) Video