| No. | Brand | J | F | f | T | A | s | S | r |
| NUP2310 | - | - | - | - | - | - | - | - | - |
| ISO9001 | INA | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| NU312ET | NSK | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| NP300 | - | - | - | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 500tph | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 23122 | - | - | - | - | - | - | - | - | - |
| 6204 | NTN | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 1500 | fag | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| 6310ZZC3 | - | - | - | - | - | - | - | - | - |
| 87271 / CR87271 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):72; Availability:In Stock; Weight:1.26 KGS; Oil Limiting Speed (r/min):13900; Grease Limiting Speed (r/min):10100; Static Load Rating (kN):69.5; Seals or Shields:Open Type; Preload:Light; d:90mm; D:140mm; |
| 84390 / CR84390 Stainless Speedi Sleeve For Shaft Repair | End plug (suffix Y):X-5217-4; P120°:207 kN; Taconite seal:TER 552; ba:89.694 mm; Housing:SAFS 048 KA; A1:203.2 mm; H1:209.55 mm; h:56.356 mm; Cap bolt, SAE grade:8; Da:359.999 mm; |
| CR99235 Stainless Steel Speedi Sleeve For Shaft Repair | Stabilizing ring:SR-26-0; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; ba:65.881 mm; L:466.725 mm; h:60.325 mm; Ca:89.789 mm; H1:152.4 mm; A1:133.35 mm; Initial grease fill:382.73 g; |
| 84576 / CR84576 Stainless Speedi Sleeve For Shaft Repair | P120°:107 kN; P90°:173 kN; Cap bolt recommended tightening torque:271.2 N·m; L:711.2 mm; H:401.637 mm; H2:79.375 mm; P180°:113 kN; Mass pillow block:178 kg; End plug (suffix Y):EPR 16; J max.:619.125 mm; |
| HMV88E / HMV 88E Hydraulic Nut 442x566x74mm | Bearing number:6209ZZ; Size (mm):45x85x19; Bore Diameter (mm):45; Outer Diameter (mm):85; Width (mm):19; d:45 mm; D:85 mm; B:19 mm; C:19 mm; r:1.1 mm; Weight:0.425 Kg; Basic dynamic load rating (C):32,5 kN; Basic static load rating (C0):20,4 kN; |
| 87921 / CR87921 Stainless Speedi Sleeve For Shaft Repair | Weight:9.00 KGS; Availability:In Stock; Reference Speed Rating (r/min):3200; Dynamic Load Rating (kN):647; Seals or Shields:Open Type; D:215mm; Clearance:C3; Limiting Speed Rating (r/min):2600; d:120mm; B:58mm; |
| AOH2264G(22264CCK, 22264CAK, 22264CCK/W33 Bearing Withdrawal Sleeve) | d:140mm; D:210mm; SKU:23028-e1-k-tvpb-qbl; Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; B:53mm; Clearance:Standard; Cage Type:Plastic; |
| 99326 / CR99326 Stainless Speedi Sleeve For Shaft Repair | B:22mm; Dynamic Load Rating (kN):62.4; Preload:Light; Seals or Shields:Open Type; Static Load Rating (kN):58.5; Fatigue Load Rating (kN):2.45; Grease Limiting Speed (r/min):9500; d:80mm; D:125mm; Availability:In Stock; |
AHX3222G Withdrawal Sleeve(matched Bearing:23222CCK/W33) Video