| No. | Brand | J | F | f | T | A | s | S | r |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 25%-40% | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| 2F | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| (20.5% | - | - | - | - | - | - | - | - | - |
| EX85 | - | - | - | - | - | - | - | - | - |
| A4vg28/A4vg40/A4vg56 | Rexroth | - | - | - | - | - | - | - | - |
| 9114617 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 1210EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 6001C3 | SKF | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| 2019 | Danfoss | - | - | - | - | - | - | - | - |
| VOE14521451 | - | - | - | - | - | - | - | - | - |
| DAC40740036/34 | NTN | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| (10 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | 185 mm | - | - | - |
| 99401 / CR99401 Stainless Speedi Sleeve For Shaft Repair | Calculation factor X:0.54; Limiting speed:3000 r/min; Basic dynamic load rating C:520 kN; Basic static load rating C0:865 kN; r0:2 mm; d1 ≈:260 mm; ra max.:3 mm; r1,2 min.:4 mm; Calculation factor e:1.34; Calculation factor Y0:0.44; |
| FTRA5070 Thrust Bearing Ring / Thrust Needle Bearing Washer 50x70x1mm | Cage Type:Plastic; Clearance:C3; Oil Limiting Speed (r/min):7100; Dynamic Load Rating (kN):38400; Seals or Shields:Open Type; Weight:0.02 KGS; SKU:3207bnrtnc3-nsk; Grease Limiting Speed (r/min):5600; D:72mm; B:27mm; |
| TMBH 1 Portable Bearing Induction Heater | Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; D1:40 mm; h:23 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; α:105 °; B1:5 mm; Specific static load factor K0:45 N/mm²; d:22 mm; |
| FTRB7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x1.5mm | Fatigue load limit Pu:212 kN; +:0.2 mm; B:95 mm; ra max.:1.5 mm; Basic static load rating C0:2160 kN; d:260 mm; Snap ring Seeger:SW 340; C:94 mm; r min.:1.8 mm; C2:5.4 mm; |
| 99850 / CR99850 Stainless Speedi Sleeve For Shaft Repair | B:37mm; Cage Type:Brass; d:90mm; Dynamic Load Rating (kN):143; Static Load Rating (kN):228; D:140mm; SKU:nn3018m2kc1nap5-nach; Availability:In Stock; Oil Limiting Speed (r/min):7800; Seals or Shields:Open Type; |
| 100 mm x 180 mm x 46 mm TRA1423 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x36.5x0.8mm | SKU:2220-qbl; d:100mm; Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:Standard; Cage Type:Steel; D:180mm; B:46mm; Size (mm):100 mm x 180 mm x 46 mm ; |
| CP1730 Thrust Plate 17x29.5x0.8mm | Fatigue load limit Pu:600 kN; B:200 mm; d:400 mm; Design variant/feature:NN.1/W33; r1,2 min.:5 mm; Da max.:580 mm; Da min.:564 mm; s max.:4.5 mm; Calculation factor kr:0.28; Basic static load rating C0:7200 kN; |
| MSR20x1.5 Precision Locknut / MSR-M20x1.5 Locking Nut (M20x1.5)x40x18mm | Clearance:C3; Static Load Rating (kN):93; Fatigue Load Rating (kN):5.4; Limiting Speed Rating (r/min):8000; Cage Type:Brass; Reference Speed Rating (r/min):4800; Weight:3.30 KGS; B:34mm; D:180mm; Seals or Shields:Open Type; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
AH315G Withdrawal Sleeve(matched Bearing:2215K, 1315K, 22215EK,21315CCK, C2215K, C2215KV) Video