| No. | Brand | J | F | f | T | A | s | S | r |
| 9e-1b40-0876-1105 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| SK210LC-8 | INA | - | - | - | - | - | - | - | - |
| G5-20-1FE13F-L | Parker | - | - | - | - | - | - | - | - |
| P315/P330 | Parker | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 3-9x40 | IKO | - | - | - | - | - | - | - | - |
| sulphate_10043-01-3 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 51330F | SKF | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 1U1779 | - | - | - | - | - | - | - | - | - |
| 3-19mm | - | - | - | - | - | - | - | - | - |
| 180 | - | - | - | - | - | - | - | - | - |
| 314SF | TRW | - | - | - | - | - | - | - | - |
| 50% | INA | - | - | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| (JS-SSN003) | - | - | - | - | - | - | - | - | - |
| HMV36E / HMV 36E Hydraulic Nut (M180x3)x256x48mm | Basic Dynamic Radial Load Rating C:138000 N; Fillet Radius ra:2.10 mm; B:58.70 mm; Basic Static Radial Load Rating Co:122000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; d:65.000 mm; D:140.0000 mm; |
| 90292 / CR90292 Stainless Speedi Sleeve For Shaft Repair | Grease Limiting Speed (r/min):6300; Fatigue Load Rating (kN):2.12; SKU:71828cdgb/p4-skf; Preload:Medium; Seals or Shields:Open Type; B:18mm; Cage Type:Plastic; d:140mm; Weight:0.80 KGS; Clearance:Standard; |
| CR99264 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):5.1; d:12mm; Limiting Speed Rating (r/min):18000; Static Load Rating (kN):2.37; Fatigue Load Rating (kN):--; D:28mm; Clearance:C3; Cage Type:Steel; Seals or Shields:Two Rubber Seals; Reference Speed Rating (r/min):--; |
| AOHX3096G (23096CAK/W33, C3096KM, 23096CAK, 23096CCK Bearing Withdrawal Sleeve) | Availability:In Stock; B:58mm; d:130mm; Weight:16.70 KGS; Fatigue Load Rating (kN):15.6; Dynamic Load Rating (kN):275; Static Load Rating (kN):300; Reference Speed Rating (r/min):2600; Cage Type:Brass; Clearance:Standard; |
| 99325 / CR99325 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; SKU:2315-m-fag; Limiting Speed Rating (r/min):6000; Static Load Rating (kN):42; Reference Speed Rating (r/min):6700; Clearance:Standard; D:160mm; Seals or Shields:Open Type; Cage Type:Brass; B:55mm; |
| 99859 / CR 99859 Stainless Speedi Sleeve For Shaft Repair | B:52mm; Clearance:C3; Limiting Speed Rating (r/min):3600; Dynamic Load Rating (kN):540; Cage Type:Plastic; Static Load Rating (kN):730; Fatigue Load Rating (kN):70; Reference Speed Rating (r/min):2600; Availability:In Stock; Weight:0.02 KGS; |
| AH316 Withdrawal Sleeve (matched Bearing:2216EK, 1316K, 21316CCK, C2216K, C2216KV 22216EK) | Basic Dynamic Radial Load Rating C:130000 N; Oil Speed Rating n2:3400 rpm; d:90.000 mm; D:160.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; Accessories:No Shield, no Seal,; B:52.40 mm; Basic Static Radial Load Rating Co:120000 N; Grease Speed Rating n1:2400 rpm; |
| TRA3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x0.8mm | Reference Speed Rating (r/min):4200; SKU:22213-e1-c3-fag; Availability:In Stock; D:120mm; Static Load Rating (kN):210; Fatigue Load Rating (kN):25.5; Seals or Shields:Open Type; Limiting Speed Rating (r/min):6700; Clearance:C3; Cage Type:Steel; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
AH2309 Withdrawal Sleeve (22309EK Bearing) Video