| No. | Brand | J | F | f | T | A | s | S | r |
| 150lm/W | INA | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 513052 | Timken | - | - | - | - | - | - | - | - |
| 22224-E1A-M | fag | - | - | - | - | - | - | - | - |
| Catsbs80 | - | - | - | - | - | - | - | - | - |
| ZAXIS450 | - | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 950 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 1W | - | - | - | - | - | - | - | - | - |
| sl045030-pp-2nr | INA | - | - | - | - | - | - | - | - |
| 305183 | - | - | - | - | - | - | - | - | - |
| MM212KS2CR | FAFNIR | - | - | - | - | - | - | - | - |
| 30X47X30 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| EAZ 212 Induction Heater | Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:42300 N; Oil Speed Rating Open/Shielded n2:6700 rpm; D:115.0000 mm; Basic Static Radial Load Rating Co:35500 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:5600 rpm; B:20.00 mm; Sealed Speed Rating n3:3400 rpm; d:75.000 mm; |
| AHX3038 Withdrawal Sleeve 180x190x96mm | ra max.:1.5 mm; r5 min.:0.6 mm; Da max.:82 mm; Ca min.:3 mm; r3,4 min.:1.5 mm; Reference speed:4800 r/min; rc max.:0.6 mm; T:43.5 mm; D:90 mm; Limiting speed:7500 r/min; |
| HMV110E / HMV 110E Hydraulic Nut 552x693x83mm | G:M 40x1.5; Axial static load carrying capacity:62 kN; B:13 mm; h:2.5 mm; b:6 mm; Associated spanner:HN 8-9; B3:3 mm; Recommended grub screw tightening torque:8 N·m; d1:47.5 mm; d3:58 mm; |
| AH322 Withdrawal Sleeve 105x110x63mm | SKU:23232kejw33c4-timken; Clearance:C4; Seals or Shields:Open Type; D:290mm; Cage Type:Steel; Dynamic Load Rating (kN):1470; Weight:29.30 KGS; Availability:In Stock; B:104mm; d:160mm; |
| AH24040 Withdrawal Sleeve(matched Bearing:24040CCK,24040CAK, 24040CCK30/W33, C4040K30V) | D:52.0000 mm; Basic Dynamic Radial Load Rating C:15900 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:10200 N; B:15.00 mm; Accessories:Snap-Ring; d:20.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; |
| 99799 / CR99799 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; SKU:7410bgam-skf; D:130mm; Dynamic Load Rating (kN):95.6; B:31mm; Fatigue Load Rating (kN):2.7; Cage Type:Brass; Reference Speed Rating (r/min):6300; Availability:In Stock; Static Load Rating (kN):64; |
| TRB6681 Thrust Bearing Ring / Thrust Needle Bearing Washer 104.775x128.575x1.6mm | d:85mm; Weight:0.56 KGS; B:18mm; Dynamic Load Rating (kN):37.5; D:120mm; Seals or Shields:Open Type; Static Load Rating (kN):38.7; Speed Rating (r/min):10800; Clearance:Standard; Cage Type:Plastic; |
| CPR42552 Thrust Plate 25x52x4mm | Static Load Rating (kN):86.5; Dynamic Load Rating (kN):122; Fatigue Load Rating (kN):5.2; Clearance:Standard; Availability:In Stock; D:170mm; Limiting Speed Rating (r/min):2600; B:39mm; Cage Type:Steel; SKU:6316-2rsr-fag; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
AH309 Withdrawal Sleeve (22209EK Bearing) Video