| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| UCFC211 | NSK | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| F84003 | Bower | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| F636ZZ | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| NU306E.M1 | fag | - | 155 mm | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 6315 | FAFNIR | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| 3-9x40 | IKO | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| 6800RS | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| 4D102 | - | - | - | - | - | - | - | - | - |
| Jy-614 | - | - | - | - | - | - | - | - | - |
| 99359 / CR99359 Stainless Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):20000; Weight:0.02 KGS; d:20mm; Reference Speed Rating (r/min):32000; B:14mm; Availability:In Stock; Static Load Rating (kN):3.4; Clearance:C3; Cage Type:Plastic; D:47mm; |
| CPR81210 Thrust Plate 50x78x6.5mm | Cage Type:Steel; Reference Speed Rating (r/min):7000; D:32mm; Clearance:Standard; B:22mm; Dynamic Load Rating (kN):15.9; Limiting Speed Rating (r/min):10000; SKU:52202-skf; Minimum Load Factor:0.0038; Static Load Rating (kN):25; |
| AS4060 Thrust Needle Roller Bearing Washer 40x60x1mm | Availability:In Stock; d:55mm; Fatigue Load Rating (kN):1.9; D:120mm; Condition:New; Cage Type:Steel; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; B:29mm; Dynamic Load Rating (kN):74.1; |
| AOH24048 Withdrawal Sleeve Supplier | Cage Type:Plastic; Seals or Shields:Open Type; D:110mm; Availability:In Stock; d:60mm; SKU:2212etn9/c3-qbl; Weight:0.02 KGS; Clearance:C3; B:28mm; |
| FTRC3047 Thrust Bearing Ring / Thrust Needle Bearing Washer 30x47x2mm | Dimension D2:3.0000 in; Insert Bearing IB:Stainless Steel; Basic Dynamic Radial Load Rating:4560 lbf; Dimension G:0.3750 in; Shaft Diameter D:1 7/16 in; Weight W:1.50 lb; Dimension N:0.7813 in; Width A:1.6250 in; Dimension S1:1.0000 in; Dimension C:3.5000 in; |
| 45 mm x 100 mm x 25 mm AHX320 Withdrawal Sleeves 95x100x59mm | Weight:0.20 KGS; SKU:638-zen; B:9mm; Clearance:Standard; Availability:In Stock; d:8mm; Seals or Shields:Open Type; D:28mm; Cage Type:Steel; Size (mm):45 mm x 100 mm x 25 mm ; |
| TRE4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x4mm | Adapter sleeve:OH 3064 H; Da:480 mm; bb:115.5 mm; H:591 mm; Oil level, min.:85 mm; J6:770 mm; Q150°:1650 kN; Ca:181 mm; Oil seal:TSD 3064 U; L:830 mm; |
| AOH24144 Withdrawal Sleeve(24144CCK30/W33,24144CAK Bearing) | B:42.00 mm; Basic Static Radial Load Rating Co:104000 N; d:70.000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:143000 N; Fillet Radius ra:2.50 mm; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Shield & Seal; |
AH308 Withdrawal Sleeve Video