| No. | Brand | S | b | E | A | a | J | f | N |
| 18W | - | - | - | - | - | - | - | - | - |
| E0 | INA | - | - | - | - | 6 mm | - | - | - |
| 15x24x5mm-20x27x4mm | - | - | - | - | - | - | - | - | - |
| TKIT-2006U-FLM/LM | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 4FT | - | - | - | - | - | - | - | - | - |
| 6215.2RSR.C3 | fag | - | - | - | - | - | - | - | - |
| GE50-DO-2RS | INA | - | - | - | - | - | - | - | - |
| 1970s/80's | - | - | - | - | - | - | - | - | - |
| 22220E/C4 | INA | - | - | - | - | - | - | - | - |
| 18PCS | - | - | - | - | - | - | - | - | - |
| 1.4 | SKF | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| 24PCS | - | - | - | - | - | 40 mm | - | - | - |
| Cartridge(250g), | - | - | - | - | - | - | - | - | - |
| SNCM439 | - | - | - | - | - | - | - | - | - |
| 40W | - | - | - | - | - | - | - | - | - |
| (LC-101) | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| DH55 | - | - | - | - | - | - | - | - | - |
| 708-2H-01121 | - | - | - | - | - | - | - | - | - |
| 7008ACD/PA9ADBB | - | - | - | - | - | - | - | - | - |
| 6302RS | - | - | - | - | - | - | - | - | - |
| BS1088 | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 70-1000 | - | - | - | - | - | - | - | - | - |
| 81N8-00022 | - | - | - | - | - | - | - | - | - |
| 23072CACK/W33+H3072 Self-aligning Roller Bearing 340*540*134mm | Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; Tolerance housing:H7; D:20 mm; B:15 mm; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; d:15 mm; Permissible sliding velocity v min.:0.25 m/s; |
| 23064CA/W33 23064CAF3/W33 23064CA/W33S1C4 Spherical Roller Bearings | Basic dynamic load rating C:132 kN; da min.:48.2 mm; B:40 mm; s1 max.:9.4 mm; Da max.:64.8 mm; d2 ≈:52 mm; Mass bearing:0.53 kg; D:68 mm; Limiting speed:2600 r/min; Misalignment factor k1:0.091; |
| 10mm Bore GIR10DO GIR10-DO Right-hand Female Thread Rod End Bearing | d:25 mm; B:26.5 mm; Mass inner ring:0.046 kg; F:30 mm; r, r1,2 min.:0.3 mm; |
| 24096 Spherical Roller Bearing 480x700x218mm | d:85.000 mm; Basic Static Radial Load Rating Co:260000 N; B:82.00 mm; Fillet Radius ra:2.50 mm; D:180.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3600 rpm; Basic Dynamic Radial Load Rating C:281000 N; Oil Speed Rating n2:5100 rpm; |
| 23124 Spherical Roller Bearing 120x200x62mm | Housing material:Cast iron; Fatigue load limit Pu:0.475 kN; J6:98.5 mm; H:141.5 mm; s1:22.2 mm; J:116.5 mm; J7:12.5 mm; Limiting speed:1200 r/min; d:30 mm; A1:13 mm; |
| GEGZ76.2ES Inch Spherical Plain Bearing 76.2x130.175x76.759mm | Oil Speed Rating Open/Shielded n2:3400 rpm; B:40.00 mm; d:120.000 mm; Basic Static Radial Load Rating Co:118000 N; Sealed Speed Rating n3:1900 rpm; D:215.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:146000 N; Accessories:One Shield & Snap-Ri; |
| GEF35ES Spherical Plain Bearing 35x55x30mm | Eye bolt:2 x 3/8-16 UNC; A1:180.975 mm; S:4.763 mm; P180°:202 kN; Max. speed for PosiTrac Plus seal:875 r/min; P150°:173 kN; Da:319.999 mm; H1:190.5 mm; H2:76.2 mm; Initial grease fill:1304.1 g; |
| GEH100HCS-2RS Spherical Plain Bearing 100x150x71mm | B:50 mm; F:220 mm; r, r1,2 min.:1.5 mm; Mass inner ring:2.52 kg; d:200 mm; |
Spherical Plain Bearing GE15C Video