No. | Brand | S | b | E | A | a | J | f | N |
5182A | - | - | 13.9 mm | - | - | - | - | - | - |
7010A5 | - | - | - | - | - | - | - | - | - |
ZDR10DP2-40/150YM | Rexroth | - | - | - | - | - | - | - | - |
212/C3 | - | - | - | - | - | - | - | - | - |
400 | - | - | - | - | - | - | - | - | - |
17M-27-00101 | - | - | - | - | - | - | - | - | - |
02420 | Timken | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | 17.569 mm | - | - | - |
25x37x7mm | SKF | - | - | - | - | - | - | - | - |
401C | John Deere | - | - | - | - | - | - | - | - |
868SI | - | - | - | - | - | - | - | - | - |
50W | - | - | - | - | - | - | - | - | - |
6215.2RSR.C3 | fag | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
CL2B-DA06B | - | - | - | - | - | 23.3 mm | - | - | - |
GSF1200 | - | - | - | - | - | - | - | - | - |
2x | - | - | - | - | - | - | - | - | - |
NJ2218ECP/C3 | - | - | - | - | - | - | - | - | - |
500 | - | - | - | - | - | - | - | - | - |
GPZ1100 | NTN | - | - | - | - | - | - | - | - |
DH55 | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | 50 mm |
IP68 | - | - | - | - | - | - | - | - | - |
SE4000FD | - | - | - | - | - | - | - | - | - |
NJ2311 | NSK | - | - | - | - | - | - | - | - |
12mm | - | - | - | - | - | - | - | - | - |
DKCXX.3-016-7 | Rexroth | - | - | - | - | - | - | - | - |
23030C Spherical Roller Bearing 150x225x56mm | Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:11000 rpm; Grease Speed Rating Open/Shielded n1:17000 rpm; D:42.0000 mm; Basic Static Radial Load Rating Co:5000 N; d:20.000 mm; B:12.00 mm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:20000 rpm; Basic Dynamic Radial Load Rating C:9360 N; |
12 mm x 32 mm x 10 mm 22228CA Spherical Roller Bearing 140x250x68mm | rs (min):1 mm; Bearing designation:3204 ; Da:42 max; Grease:9 400 min-1; ra:1 max; Dynamic (Cr):19.905 kN; a:31 mm; D:47 mm; Static (Cor):15.000 kN; B:20.6 mm; Size (mm):12 mm x 32 mm x 10 mm ; |
230/1060YMB Spherical Roller Bearing 1060x1500x325mm | Cap bolt recommended tightening torque:4284.4 N·m; R1:163.512 mm; A1:228.6 mm; Cap bolt:4 x 1 1/2-6 UNC; P90°:400 kN; P120°:249 kN; R2:50.8 mm; Max. speed for Taconite seal:425 r/min; H:495.3 mm; Initial grease fill:3515.4 g; |
24018 Spherical Roller Bearing 90x140x50mm | B:18 mm; Locking device:MB 20; Lock nut:KM 20; d1:88.9 mm; B1:76 mm; B4:20 mm; G:M 100x2; d3:130 mm; d:100 mm; Hydraulic nut:HMV 20 E; |
23122CA/W33 23122CAK/W33 23122CAK/C3W33 | PG:1/8 NPT; P90°:55.6 kN; da:70 mm; Lock washer:W 14; N1:22.225 mm; dc:66.675 mm; Da:150 mm; Mass pillow block:18.2 kg; A2:136.525 mm; Labyrinth ring (db shaft position):LOR 64; |
22332-2CS5K/VT143 Vibrating Screen Bearing 160x340x114mm | Sleeve:S 117x3; d1:76.2 mm; Threads per inch:12; B:16.129 mm; B1:83.871 mm; B4:17.704 mm; Hydraulic nut:HMVC 17E; Lock nut:AN 17; G:84.836 mm; Mass adapter sleeve assembly:1.55 kg; |
23034CK Spherical Roller Bearing 170x260x67mm | Dynamic (Cr):12 mm; Grease:5390 kN; with tapered bore:600 min-1; Static (Cor):22.3 mm; Oil:424.360 kN; d:320 mm; with cylindrical bore:500 min-1; rs (min):5 mm; D:540 mm; B:176 mm; |
23036K/W33+H3036 Spherical Roller Bearings | Grease Speed Rating n1:7400 rpm; Basic Dynamic Radial Load Rating C:27600 N; Fillet Radius rb:0.30 mm; B:28.00 mm; Oil Speed Rating n2:9600 rpm; Basic Static Radial Load Rating Co:24000 N; d:35.000 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm; |
23328CAME4C4U15-VS Vibrating Screen Bearing 140x300x118mm Video