| Japan Made NRXT4010DDC1P5 Crossed Roller Bearing 40x65x10mm | Bearing number:4447; m:5,204 lbs / Weight; d:104,775 mm; D:155,8 mm; C0a:70000 lbf / Static l; Brand:INA; Bore Diameter (mm):104,775; Ca:24000 lbf / Dynamic; |
| RA6008CCC0 Split Type Crossed Roller Bearing 60x76x8mm | E:60,05 mm; Bearing number:IJ143001; N:8,5 mm; F:151,5 mm; K:73,87 mm; I:74,5 mm; J:11 mm; H:13,5 mm; 1:Wheel Bearing; M:61,95 mm; |
| RA16013CUCC0 Split Type Crossed Roller Bearing 160x186x13mm | D1:74,6 mm; Weight:0,433 Kg; rmin:1,1 mm; Bearing number:20209-K-TVP-C3; da min.:52 mm; Da max.:78 mm; Fatigue load limit (Pu):5,9; Outer Diameter (mm):85; r min.:1,1 mm; Width (mm):19; |
| RA16013C1 Crossed Roller Bearing 160x186x13mm | D:47 mm; Basic static load rating (C0):13,1 kN; Outer Diameter (mm):41.5; Bearing number:N 1005; B:12 mm; Bore Diameter (mm):25; Weight:0.084 Kg; r1 min.:0.3 mm; Size (mm):25x41.5x12; (Grease) Lubrication Speed:15000 r/min; |
| RE2008UC0 Crossed Roller Bearing 20x36x8mm | Bore Diameter (mm):216; (Grease) Lubrication Speed:1200 r/min; D:245 mm; Outer Diameter (mm):223; Width (mm):42; Size (mm):216x223x42; Ew:223 mm; Fw:216 mm; Brand:Timken; Basic dynamic load rating (C):250 kN; |
| RE4510UUCC0P5 Crossed Roller Bearing 45x70x10mm | Limiting Speed - Oil:3,200 rpm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:3 mm; Limiting Speed - Grease:2,400 rpm; B:50 mm; Configuration:Single Row; Static Load Rating:208,000 N; d:110 mm; Weight:10.900 kg; a:49.6 mm; |
| NRXT30035 C1P5 Crossed Roller Bearing 300x395x35mm | Dimension SA:3.13 in; Oil Lubrication - M/N Seal:2200 rpm; UPC Code:0883450041409; Oil Lubrication - B/C/O Seal:1600 rpm; Pre Install Clearance Min:0.040 mm; Engineering Group:Mounted Bearing; Eng Internal Radial Clearance - Max:0.0026; Locking Style:Single Concentric; Dimension BC:6.38 in; Shaft Tolerance:0.0015 in; |
| RE13025UUCS-S Crossed Roller Bearing 130x190x25mm | Cg - Geometry Factor:0.0939; G1 - Heat Generation Factor (Roller-Raceway):209.8; G2 - Heat Generation Factor (Rib-Roller End):39.7; Cup Part Number:KJF9510; e - ISO Factor3:0.34; Y - ISO Factor4:1.77; Design Units:METRIC; D:160.000 mm; Series:JF9500; Da - Cup Frontface Backing Diameter:154.43 mm; |