| RE25025UUC0PS-S Crossed Roller Bearing 250x310x25mm | d:20 mm; C:25,4 mm; B:25,4 mm; Brand:NTN; Outer Diameter (mm):52; Bore Diameter (mm):20; Size (mm):20x52x25.4; D:52 mm; Width (mm):25,4; Bearing number:DF0455; |
| RU85UU Crossed Roller Bearing 55x120x15mm | D:460 mm; ra max.:2,5 mm; d:340 mm; e:0.18; Cr:1680; Y0:3.74; Calculation factor (e):0,18; (Refer.)Mass(kg):45.0; (Oil) Lubrication Speed:790 r/min; Grease lub.:590; |
| RE22025UUCS-S Crossed Roller Bearing 220x280x25mm | H - 6 mm / Tolerance: 0 / -0,5:6 mm / Tolerance: 0; Size (mm):85x99x6; da:99 mm / Tolerance: +; Bore Diameter (mm):85; Ca:26500 N / Dynamic lo; Bearing number:AXS8599; α:60 ° / Angle 60&; m:60 g / Weight; Brand:INA; Outer Diameter (mm):99; |
| RE9016UUC0SP5 / RE9016UUC0S Crossed Roller Bearing 90x130x16mm | Weight:25,5 Kg; d:375 mm; Basic dynamic load rating (C):290 kN; D:490 mm; Brand:NACHI; Bore Diameter (mm):375; r:2,5 mm; Width (mm):45; Basic static load rating (C0):1280 kN; Outer Diameter (mm):490; |
| RE19025CC0 / RE19025C0 Crossed Roller Bearing 190x240x25mm | Outer Diameter (mm):6,35; Standard Clearance:K25; Radius (min) (rs):0.004; Material:Martensitic Stainles; Ball Dia (Dw):0.0394; Bore Diameter (mm):1,98374; Precision:A1; Weight (g):0.40; Brand:AST; Max. Shaft Shoulder Dia. Inner (Li):0.2; |
| XR766051 Crossed Taper Roller Bearing 457.2X609.6X63.5MM | Bearing number:UCTX11; Basic dynamic load rating (C):52,4 kN; A:64 mm; Basic static load rating (C0):36,2 kN; A2:44 mm; L1:119 mm; Weight:5,3 Kg; L3:102 mm; H:146 mm; Bore Diameter (mm):55; |
| RE45025UUCC0P5 Crossed Roller Bearing 450x500x25mm | e:0.072 in; Total Length H:123.8 mm; Housing Width A:27.9 mm; Center of Bearing from Housing End A2:0.778 mm; Bearing Number:G1015KPPB3; Static Load Rating:1750 lbf; Weight:1.731 lb; Flange Thickness A1:11.1 mm; Housing Style:Two-Bolt Flange; Bolt Hole Size N:11.5 mm; |
| RA20013C-UCC0S Split Type Crossed Roller Bearing 200x226x13mm | D1:2.974 in; Sleeve:S-111; Taper:1:12; Diameter d :1 15/16 in; Series:223K and 232K; Locknut:N-11; S:0.563 in; Bearing Number:22311K; Lockwasher and Lockplates:W-11; Tolerance1:-0.003 in; |