| RE10016UUCC0 Crossed Roller Bearing 100x140x16mm | Fw:16 mm; Bore Diameter (mm):16; Brand:KOYO; Basic static load rating (C0):14,9 kN; Basic dynamic load rating (C):12,2 kN; D:24 mm; Width (mm):16; C:16 mm; Outer Diameter (mm):24; Bearing number:BHTM1616A; |
| RE25030UUCC0PS-S Crossed Roller Bearing 250x330x30mm | Brand:NTN; Product Group:B04334; Mass:0.82 kg; Static load, C0:139 kN; Y2:1.82; Y0:1; Fatigue limit load, Cu:17 kN; Dynamic load, C:107 kN; r1a max:2.3 mm; Max operating temperature, Tmax:120 °C; |
| RA13008UUCC0P5 / RA13008CC0P5 Crossed Roller Bearing 130x146x8mm | a - Effective Center Location4:-0.01 in; B - Cone Width:1.2500 in; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:11000 lbf; d:1.8750 in; R - Cone Backface To Clear Radius3:0.14 in; G2 - Heat Generation Factor (Rib-Roller End):16.4; C90 - Dynamic Radial Rating (90 million revolutions)5:10300 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:69100 lbf; |
| RA11008UC1 Crossed Roller Bearing 110x126x8mm | Bore Diameter (mm):75; Basic dynamic load rating (C):128 kN; d:75 mm; Outer Diameter (mm):160; B:37 mm; Brand:Timken; Width (mm):37; Size (mm):75x160x37; Bearing number:315KDD; Weight:3,175 Kg; |
| RE16025UUC0SP5 /RE16025UUC0S Crossed Roller Bearing 160x220x25mm | d1:30.00 mm; Weight:0.16 Kg; Locknut:KM7; Lockwasher and Lockplates:MB7; C:9 mm; D3:52 mm; Thread G:M35x1.5; L:43.00 mm; |
| RE2508UUCC0S / RE2508CC0S Crossed Roller Bearing 25x41x8mm | Fw:35 mm; Bore Diameter (mm):35; Brand:KOYO; Size (mm):35x42x16; Outer Diameter (mm):42; Weight:0,038 Kg; C:16 mm; D:42 mm; Width (mm):16; Bearing number:BM3516; |
| NRXT9020DDC8P5 Crossed Roller Bearing 90x140x20mm | Static Load Rating:3440 lbf; Center of Bearing from Housing End A2:12.3 mm; Center of Bearing from Bearing End S:12.3 mm; Inside Ring Outside Diameter:1.843 in; Weight:2.381 lb; Seal Type:Narrow Shroud; Housing Width A:0.969 in; Shaft Size d:1 7/16 in; Bolt Hole Size N:13.1 mm; Bearing Number:GYA107RRB; |
| RE24025UUC0P5 Crossed Roller Bearing 240x300x25mm | rs min:0.6 mm; D2:71,5 mm; D:62 mm; Ca:28.8 kN; Cr:27.9 kN; Dynamic load rating axial (C):28,8 kN; Nlim (oil):4,500 rpm; C1:14 mm; Fw:50 mm; Mass:0.32 kg; |