| CSG-20 Harmonic Drive Bearing, Robot Bearing | R - Cone Frontface To Clear Radius1:0.060 in; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:0 in; D:14.1250 in; Cup Part Number:H244810XX; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:47900 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:84200 lbf; G2 - Heat Generation Factor (Rib-Roller End):150; Cg - Geometry Factor12:0.154; K - Factor7:1.76; |
| Japan Made NRXT 8013 Crossed Roller Bearing 80x110x13mm | Preload class D - GD:640 N; Static axial stiffness, preload class A:56 N/µm; da - max.:72.1 mm; Basic static load rating - C0:17 kN; Ball - Dw:7.938 mm; Calculation factor f2C:1.09; Preload class C:104 N/micron; Calculation factor f1:1; rb - max.:0.3 mm; Bearing number:S71913 CD/P4A; |
| RB6013UUC1 Separable Outer Ring Crossed Roller Bearing 60x90x13mm | bomp:0; SRIN:-0.025; r0 max.:0,6 mm; Prod_Type3:DGBB_SR_N_OT; SDM_:130; GRS rpm:4300; ra max.:1 mm; da min.:116,5 mm; SRIX:0.025; fo:16.6; |
| Japan Made NRXT5013P5 Crossed Roller Bearing 50x80x13mm | Basic dynamic load rating (C):14 kN; H2:51 mm; Designation of housing:T205-; C:14 kN; Bearing number:UCT205+WB; N2:32 mm; SW:11 mm; C0:7.88 kN; M1:19 mm; T max.:100 °C; |
| RB70045UUCCO crossed roller bearing (700x815x45mm) Precision Robotic Bearings | Size (mm):31.77x139x70.9; Outer Diameter (mm):139; d:31,77 mm; Brand:PFI; D:139 mm; Bore Diameter (mm):31,77; Width (mm):70,9; B:70,9 mm; Bearing number:PHU2162; |
| RE25040UUC1 / RE25040C1 Crossed Roller Bearing 250x355x40mm | d:457,2 mm; Size (mm):457.2x596.9x276.225; T:276,225 mm; D:596,9 mm; Brand:NTN; Bore Diameter (mm):457,2; Bearing number:L770849D/L770810/L77; Outer Diameter (mm):596,9; Width (mm):276,225; |
| RE50050UUCC0P5S Crossed Roller Bearing 500x625x50mm | (Grease) Lubrication Speed:6 500 r/min; Weight:0,113 Kg; da min.:37 mm; C:17 mm; B:17 mm; F:40 mm; r min.:0,3 mm; Basic static load rating (C0):41,5 kN; D:50 mm; E:45 mm; |
| RE11015UUC0 Crossed Roller Bearing 110x145x15mm | Bore Diameter (mm):280; Bearing number:AST090 28080; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Length, Nominal (B):80.000; Shaft Size (ds) - 280 -0.190 / -0.242:280 0.190 / 0.242; Material:Wrapped bronze with; Bearing Outside Diameter, Nominal(Do):285.000; Bearing Type:straight; ID Chamfer Angle (B deg.):45; Outer Diameter (mm):285; |