| No. | Brand | T | Z | r | f | R | s | S | M |
| forged7075 | - | - | - | - | - | - | - | - | - |
| 1200X1800X17mm | - | - | - | - | - | - | - | - | - |
| AM119971 | John Deere | - | - | - | - | - | - | - | - |
| SH70 | - | - | - | - | - | - | - | - | - |
| 70% | INA | - | - | - | - | - | - | - | - |
| E32006j | Nachi | - | - | - | - | - | - | - | - |
| ZX850 | - | - | - | - | - | - | - | - | - |
| 2rs | - | - | - | - | - | - | - | - | - |
| +84-845-639-639 | - | - | - | - | - | 6 mm | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 514 | - | - | - | - | - | - | - | - | - |
| 30207 | SKF | - | - | - | - | - | - | - | - |
| 419-18-41300 | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | 160 mm | - | - | - |
| UL2054 | - | - | - | - | - | - | - | - | - |
| 3pc | - | - | - | - | - | - | - | 17,5 mm | - |
| 6204-NR | - | - | - | - | - | - | - | - | - |
| 4x | INA | - | - | - | - | - | - | - | - |
| 4HK1 | - | 820 mm | - | - | - | - | - | - | - |
| 3.5" | - | 22,225 mm | - | - | - | - | - | - | - |
| 99.5% | INA | - | - | - | - | - | - | - | - |
| 80ra/90ra | - | - | - | - | - | - | - | - | - |
| (LTT-R15RGB) | - | 25 mm | 105 mm | - | - | - | - | 2 mm | - |
| N21% | INA | - | - | - | - | - | - | - | - |
| 708-1W-00830 | - | - | - | - | - | - | - | - | - |
| 750 | fag | - | - | - | - | - | - | - | - |
| 85BER19XE | NSK | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| RB6013UUC0 Separable Outer Ring Crossed Roller Bearing 60x90x13mm | Compatibility:RENAULT / ESPACE II; Designation FAG:713630500; Designation SX:CX600; Bearing number:VKBA 3471; Designation Ruville:5548; Brand:SKF; |
| NRXT30025C1 Crossed Roller Bearing 300x360x25mm | Brand:AST; Dynamic Load Rating (Cr):1,200,000; Bore Dia (d):140.0000; Static Load Rating (Cor):1,700,000; Radius (min) (rs):4.000; Bore Diameter (mm):140; Max Speed (Grease) (X000 RPM):1; Outer Diameter (mm):300; Material:52100 Chrome steel,; Max Speed (Oil) (X1000 RPM):2; |
| RB11015C1 Separable Outer Ring Crossed Roller Bearing 110x145x15mm | Outer Diameter (mm):40; Fw:25 mm; Width (mm):58; Weight:0,07 Kg; C:58 mm; Angle (α):60 °; E:13,2 mm; Size (mm):25x40x58; Bearing number:LBCF 25 A; D:40 mm; |
| RE10020UUCC0P5S Crossed Roller Bearing 100x150x20mm | Full Timken Part Number:99999B; Dimension D:9.040 in; Oil Lubrication - B/C/O Seal:900 rpm; Dimension K:1.44 in; Housing Style:Four-Bolt Square Fla; Shaft Size Type:Imperial; C0 - Static Load:113000 lb; Dimension J (Bolt Size):1 in; Y1 - Geometry Factor:2.84; e - Geometry Factor:0.24; |
| RA18013UUC0P5 / RA18013C0P5 Crossed Roller Bearing 180x206x13mm | Y2 - ISO Factor6:2.05; Cage Material:Brass; Y1 - ISO Factor5:3.13; Reference Thermal Speed Rating (Grease):2600; R - Inner Ring To Clear Radius1:2.500 mm; da - Inner Ring Backing Diameter:122.0 mm; Reference Thermal Speed Rating (Oil)7:3100; Cg - Geometry Factor8:0.0716; Superseded Part:22319YMW22; Da - Outer Ring Backing Diameter:180.000 mm; |
| 70 mm x 150 mm x 51 mm RA18013C1 Crossed Roller Bearing 180x206x13mm | Brand:SNR; Bearing number:R186.02; Compatibility:CHRYSLER / JEEP / e; Designation SX:CX480; Size (mm):70 mm x 150 mm x 51 mm ; |
| RA17013UUC0-E / RA17013C0-E Crossed Roller Bearing 170x196x13mm | Designation SKF:VKBA 3643; Designation FAG:713610610; Brand:Ruville; Bearing number:5456; Compatibility:AUDI / A3 (8P1 8PA); Designation SX:CX660; Designation SNR:R154.56; |
| RA6008UUCSP5 / RA6008CSP5 Crossed Roller Bearing 60x76x8mm | Aa - Cage-Cone Backface Clearance:0.5 mm; a - Effective Center Location3:-4.3 mm; Cup Part Number:14283; e - ISO Factor8:0.38; Y - ISO Factor9:1.57; K - Factor7:1.53; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:1.8 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; |
SHG-17 Harmonic Drive Bearing, Robot Bearing Video