| 250.14.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | a - Effective Center Location4:-0.26 in; G2 - Heat Generation Factor (Rib-Roller End):23.7; K - Factor8:1.72; Cone Part Number:39586; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:16900 lbf; db - Cone Backface Backing Diameter:2.99 in; d:2.5586 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:65300 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5650 lbf; |
| M5-26P1 Rotek Slewing Ring Bearings | Enclosure:Open; ra (max):1.5 mm; Radial Clearance:0.025 to 0.050 mm; Static Load Rating:69,000 N; db (min):43.5 mm; ra1 (max):1.5 mm; Configuration:Single Row; Inside Ring Outside Diameter:53 mm; Limiting Speed - Grease:6,700 rpm; Da (max):91.5 mm; r1:1.5 mm; D:100 mm; dc (min):55 mm; db (max):52 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.5 mm; d:35 mm; Limiting Speed - Oil:8,000 rpm; |
| A10-34E6 Rotek Slewing Ring Bearings | r - Cup Backface To Clear Radius1:0.06 in; Y - ISO Factor3:1.49; C - Cup Width:0.7500 in; Cg - Geometry Factor:0.129; Cup Part Number:KLL537610; Design Units:Imperial; Db - Cup Backface Backing Diameter:8.86 in; Series:LL537600; Da - Cup Frontface Backing Diameter:9.09 in; e - ISO Factor2:0.4; D:9.3125 in; |
| A8-22E6 Rotek Slewing Ring Bearings | Contact Angle:15 ยบ; da - Inner Ring Backing Diameter:39.500 mm; Ce - Dynamic Radial Rating1:12600 N; Limiting Speed (Grease):25400 rpm; Ball Type:STEEL; r - Outer Ring To Clear Radius3:0.6 mm; C0 - Static Radial Rating:9020 N; D:55.000 mm; Da - Outer Ring Backing Diameter:51.100 mm; Bearing Width:10 mm; Limiting Speed (Oil):50800 rpm; d:35 mm; Design Units:METRIC; Bearing Weight:0.080 Kg; R - Inner Ring To Clear Radius2:0.6 mm; |
| A8-25N2 Rotek Slewing Ring Bearings | E:2.072 in; D1:0.070 in; H:0.151 in; D:0.385 in; Major Dia - d:1.767 in; C:2.827 in; G:0.490 in; Threads No. per Inch:18; |
| A12-47P2 Rotek Slewing Ring Bearings | Bore Type:Cylindrical Bore; Dynamic Load Rating:7,250 N; Limiting Speed - Grease:14,000 rpm; ra (max):0.3 mm; Static Load Rating:5,000 N; D:47 mm; Enclosure:Double Seal; B:9 mm; Radial Clearance:0.005 to 0.020 mm; Weight:0.045 kg; Da (max):45 mm; Factor fo:15.8; Configuration:Single Row; da (min):32 mm; d:30 mm; |
| 231.20.0400.503 Type 21/520.1 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:1.5 mm; Radial Clearance:0.040 to 0.075 mm; Static Load Rating:151,000 N; r1:1.5 mm; Bore Type:Cylindrical Bore; D:125 mm; d:70 mm; B:31 mm; dc (min):86 mm; dd (min):92 mm; db (max):82 mm; Limiting Speed - Grease:4,800 rpm; Enclosure:Open; ra1 (max):1.5 mm; Limiting Speed - Oil:5,600 rpm; Inside Ring Outside Diameter:84.5 mm; ra (max):1.5 mm; db (min):78.5 mm; Dynamic Load Rating:119,000 N; |
| M5-38P1Z Rotek Slewing Ring Bearings | Adapter Sleeve1:OH3064H; Housing:SNT 3064; Seal:TA64; Locating Rings (width x OD):SR480X10; End Cover2:EC64; N:42 mm; J:710 mm; C:22 mm; L:830 mm; Max Oil Speed:910; J1:190 mm; C1 Dynamic Load Rating:2200; Bolt Qty:4; A3:445 mm; H:591 mm; A:350.00 mm; Lockwasher:MS3064; Seal Type:Taconite; H2:110 mm; Locknut:HM3064; |