| A13-38E1 Rotek Slewing Ring Bearings | Series:14000; Ab - Cage-Cone Frontface Clearance:0.07 in; Cup Part Number:14276-B; Cg - Geometry Factor11:0.0668; Cone Part Number:14117A; Da - Cup Frontface Backing Diameter:2.60 in; R - Cone Backface To Clear Radius1:0.14 in; Y - ISO Factor9:1.57; C0 - Static Radial Rating:13900 lbf; db - Cone Backface Backing Diameter:1.69 in; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; T - Bearing Width to Flange:0.3123 in; |
| W13-43P2 Rotek Slewing Ring Bearings | Grease Reference Speed:21000 rpm; Outside Ring Width B:10.000 mm; Outside Diameter D:32.000 mm; Clearance:C3; Oil Reference Speed:30000 rpm; Bore Size d:12 mm; Snap Ring Diameter D2 max:36.700 mm; Weight:0.04 Kg; Snap Ring Width f max:1.120 mm; Radius Rs min:0.600 mm; Features:Snap Ring; Cr - Dynamic Load Rating:6.8 kN; C0r - Static Load Rating:3 kN; |
| L6-43N9Z Rotek Slewing Ring Bearings | C0r - Static Load Rating:63.8 kN; Grease Reference Speed:5000 rpm; Outside Ring Width B:28.000 mm; Radius Rs min:2.000 mm; Weight:1.80 Kg; Outside Diameter D:150.000 mm; Clearance:C3; Features:Shields; Cr - Dynamic Load Rating:83.2 kN; Bore Size d:85 mm; Oil Reference Speed:7200 rpm; |
| 3R6-49P9 Rotek Slewing Ring Bearings | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:41000 lbf; Y2 - ISO Factor10:2.75; d:1.3750 in; D:3.2500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10600 lbf; R - Cone Backface To Clear Radius1:0.14 in; C - Double Cup Width:2.1875 in; r - Cup Frontface To Clear Radius2:0.03 in; Bearing Weight:3.78 lb; Da - Cup Frontface Backing Diameter:2.99 in; e - ISO Factor8:0.37; |
| M5-38P1Z Rotek Slewing Ring Bearings | Adapter Sleeve1:OH3064H; Housing:SNT 3064; Seal:TA64; Locating Rings (width x OD):SR480X10; End Cover2:EC64; N:42 mm; J:710 mm; C:22 mm; L:830 mm; Max Oil Speed:910; J1:190 mm; C1 Dynamic Load Rating:2200; Bolt Qty:4; A3:445 mm; H:591 mm; A:350.00 mm; Lockwasher:MS3064; Seal Type:Taconite; H2:110 mm; Locknut:HM3064; |
| L9-42N9Z Rotek Slewing Ring Bearings | Eng Internal Radial Clearance - Max:0.0031; Oil Lubrication - M/N Seal:1600 rpm; Shaft Size Type:Imperial; Engineering Group:Mounted Bearing; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.01; Full Timken Part Number:QMFX15J215SB; Oil Lubrication - B/C/O Seal:1300 rpm; Oil Lubrication - T Seal:2900 rpm; Dimension N:3.0000 in; Dimension S:3.62 in; Weight:17.0 lb; Dimension D:6.650 in; Dimension H:1.06 in; |
| L6-25P9ZD Rotek Slewing Ring Bearings | Dimension R:0.77 in; Dimension C:6.890 in; Dimension L Exp:3.59 in; Full Timken Part Number:99999B; Dimension BC:14.00 in; e - Geometry Factor:0.26; Engineering Group:Mounted Bearing; Dimension D:5.75 in; Dimension M:2.15 in; Dimension F:6.19 in; Y2 - Geometry Factor:3.61; Dimension N:5.320 in; Grease Lubrication - B/C/O Seal:400 rpm; Oil Lubrication - T Seal:1500 rpm; Pre Install Clearance Max:0.145 mm; |
| M5-30P1Z Rotek Slewing Ring Bearings | Limiting Speed - Oil:4,500 rpm; ra1 (max):2 mm; Enclosure:Open; db (max):87 mm; Limiting Speed - Grease:3,600 rpm; dd (min):100 mm; ra (max):2 mm; db (min):82 mm; Weight:4.300 kg; dc (min):92 mm; d:70 mm; B:51 mm; Dynamic Load Rating:274,000 N; Configuration:Single Row; Fillet Radius/Chamfer:2.1 mm; D:150 mm; Radial Clearance:0.065 to 0.100 mm; r1:2.1 mm; Static Load Rating:325,000 N; Da (max):138 mm; |