| 61.20.0400.100.11.1503 Standard 5 Slewing Ring Bearings | Bearing Width:28 mm; Da - Outer Ring Backing Diameter:216.100 mm; da - Inner Ring Backing Diameter:184.700 mm; Contact Angle:15 º; Limiting Speed (Oil):13200 rpm; Bearing Weight:2.88 Kg; Cage Type:CR - Phenolic Outer; C0 - Static Radial Rating:136700 N; R - Inner Ring To Clear Radius2:2.0 mm; Ball Type:Ceramic; r - Outer Ring To Clear Radius3:2.0 mm; Ce - Dynamic Radial Rating1:133700 N; Design Units:METRIC; |
| 60.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Grease Lubrication - M/N Seal:1700 rpm; Oil Lubrication - M/N Seal:1700 rpm; Eng Internal Radial Clearance - Min:0.0030; UPC Code:0883450374385; Full Timken Part Number:QVVPXT14V208SB; Dimension A:3.00 in; Dimension D Max:8.78 in; Float:0.083 in; Shaft Size Type:Imperial; e - Geometry Factor:0.23; Pre Install Clearance Min:0.0030 in; Bearing Number:22214; Dimension H:1.38 in; C0 - Static Load:52000 lb; |
| A12-34P2B Rotek Slewing Ring Bearings | ra (max):8 mm; Radial Clearance:0.530 to 0.700 mm; Roller Profile:Symmetric; Enclosure:Open; Fillet Radius/Chamfer:9.5 mm; Retainer Material:Machined Brass; Static Load Rating:25,300,000 N; Constant e:0.30; Limiting Speed - Oil:330 rpm; Axial Load Factor Y2:3.34; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:2.24; Limiting Speed - Grease:250 rpm; Groove Width A:50 mm; Configuration:Double Row; |
| L6-43P9Z Rotek Slewing Ring Bearings | do - Ball Diameter:13.493750 mm; Limiting Speed (Grease):6600 rpm; Ball Type:STEEL; Full Timken Part Number:2MM9328WICRDUH; Contact Angle:15 º; Bearing Weight:1.75 Kg; Limiting Speed (Oil):13200 rpm; Precision Class:ISO P4S (ABEC 7/9); Design Units:METRIC; d:140 mm; r - Outer Ring To Clear Radius3:1.5 mm; R - Inner Ring To Clear Radius2:1.5 mm; Da - Outer Ring Backing Diameter:179.200 mm; D:190 mm; |
| 3R8-79P9 Rotek Slewing Ring Bearings | e - ISO Factor2:0.44; Db - Cup Backface Backing Diameter:2.48 in; Cg - Geometry Factor:0.0694; r - Cup Backface To Clear Radius1:0.04 in; D:2.8125 in; Design Units:Imperial; Y - ISO Factor3:1.35; C - Cup Width:0.4688 in; Cup Part Number:19281; Series:19000; Da - Cup Frontface Backing Diameter:2.62 in; |
| 3R8-59N2C Rotek Slewing Ring Bearings | Housing Only2:SAF 516 x 2-5/8; Bearing Number:22216K; Triple Seal 2 Req’d:LOR 41; E Min.:9.6250 in; A:3.50 in; E Max.:11.0000 in; C:3.500 in; E:10.3125 in; Seal Type:Triple Ring Seal; H:6.875 in; Bolt Hole Length:1.4375 in; Assembly Weight:37.0 lb; D:1.1875 in; Diameter S-1:2 5/8 in; B:13.000 in; Full Timken Part Number:SAF225162-5/8; Bolt Hole Width:0.750 in; Adapter Assembly Number1:SNW-16 x 2-5/8; |
| R9-59N3 Rotek Slewing Ring Bearings | Enclosure:Snap Ring Groove wit; Static Load Rating:12,100 N; Limiting Speed - Oil:14,000 rpm; Cy (max):4.6 mm; Factor fo:12.2; ra (max):1 mm; a (max):3.3 mm; B:17 mm; b (min):1.9 mm; Radial Clearance:0.013 to 0.028 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:23,600 N; Da (max):55 mm; D:62 mm; da (min):32 mm; D1 (max):59.6 mm; Snap Ring Width:1.7 mm; Configuration:Single Row; d:25 mm; Dx (min):68.5 mm; |
| A14-47N5A Rotek Slewing Ring Bearings | db (min):142 mm; Static Load Rating:770,000 N; Radial Clearance:0.085 to 0.125 mm; D:310 mm; Configuration:Single Row; Limiting Speed - Grease:2,000 rpm; Bore Type:Cylindrical Bore; dd (min):190 mm; ra1 (max):4 mm; Da (max):288 mm; d:120 mm; Limiting Speed - Oil:2,400 rpm; ra (max):4 mm; db (max):168 mm; Dynamic Load Rating:675,000 N; Enclosure:Open; B:72 mm; Weight:28.700 kg; r1:5 mm; Fillet Radius/Chamfer:5 mm; |