No. | Brand | e | N | k | i | J | B | S | t |
M5-40P1Z | Rotek | - | - | - | - | - | - | - | - |
3R6-71N9 | Rotek | - | - | - | - | - | 16 mm | - | - |
3R16-197E2 | Rotek | - | - | - | - | - | - | - | - |
A16-53E1A | Rotek | - | - | - | - | - | - | - | - |
A8-25N2 | Rotek | - | - | - | - | - | - | - | - |
L6-25E9Z | Rotek | - | - | - | - | - | - | - | - |
62.20.0450.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
R11-75N3 | Rotek | - | - | - | - | - | - | - | - |
3R6-79E9 | Rotek | - | - | - | - | - | - | - | - |
3R16-197N1 | Rotek | - | - | - | - | - | - | - | - |
W13-24P1 | Rotek | - | - | - | - | - | 74.613 mm | - | - |
L9-46P9Z | Rotek | - | - | - | - | - | - | - | - |
R11-79N3 | Rotek | - | - | - | - | - | - | - | - |
L6-43E9Z | Rotek | - | - | - | - | - | - | - | - |
A10-110P2D | Rotek | - | - | - | - | - | - | - | - |
A14-89P1 | Rotek | - | - | - | - | - | 48 mm | - | - |
3R10-88N2B | Rotek | - | - | - | - | - | - | - | - |
A10-32N1A | Rotek | - | - | - | - | - | 40 mm | - | - |
3R13-122N1B | Rotek | - | - | - | - | - | - | - | - |
3R8-98P9 | Rotek | - | - | - | - | - | 46 mm | - | - |
M5-38P1 | Rotek | - | - | - | - | - | - | - | - |
A22-98P1 | Rotek | - | - | - | - | - | - | - | - |
A12-32P2 | Rotek | - | - | - | - | - | - | - | - |
M5-36P1Z | Rotek | - | - | - | - | - | - | - | - |
A12-47P2 | Rotek | - | - | - | - | - | 9 mm | - | - |
L9-57N9Z | Rotek | - | - | - | - | - | - | - | - |
232.20.0400.013 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | - | - |
3R8-98N9 | Rotek | - | - | - | - | - | 33 mm | - | - |
S20-125E1 | Rotek | - | - | - | - | - | 1.8125 in | - | - |
231.21.0475.013 Type 21/520.1 | Standard 5 | - | - | - | - | - | 336 mm | - | - |
A24-107N1 Rotek Slewing Ring Bearings | B:19.845 mm; C0 - Static Radial Rating:11300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:10900 lbf; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):6.33; Series:1900; e - ISO Factor8:0.33; db - Cone Backface Backing Diameter:30.48 mm; Cg - Geometry Factor:0.0565; C90 - Dynamic Radial Rating (90 million revolutions)4:2820 lbf; Ab - Cage-Cone Frontface Clearance:2 mm; |
L6-25P9ZD Rotek Slewing Ring Bearings | Dimension R:0.77 in; Dimension C:6.890 in; Dimension L Exp:3.59 in; Full Timken Part Number:99999B; Dimension BC:14.00 in; e - Geometry Factor:0.26; Engineering Group:Mounted Bearing; Dimension D:5.75 in; Dimension M:2.15 in; Dimension F:6.19 in; Y2 - Geometry Factor:3.61; Dimension N:5.320 in; Grease Lubrication - B/C/O Seal:400 rpm; Oil Lubrication - T Seal:1500 rpm; Pre Install Clearance Max:0.145 mm; |
M5-38P1 Rotek Slewing Ring Bearings | Bearing Type:Split Cylindrical Ex; Dimension H :9-1/2 in; Cor - Static Load Rating:341160 lbf; Cr - Dynamic Load Rating:227893 lbf; Dimension M :8-3/4 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J2 :25-1/8 in; Maximum Speed:960 rpm; Bearing UPC:013992033130; Dimension H2:21.35 in; Note:This product line wa; Bolt Size:4 x 1-1/2; Bearing Number:MSE708BX; Support Type:Four-Bolt Plummer Bl; |
L6-33P9ZD Rotek Slewing Ring Bearings | C1 - Dynamic Radial Rating (1 million revolutions)5:30500 lbf; Cage Type:Stamped Steel; Cup Part Number:453XB; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:4540 lbf; a - Effective Center Location3:-0.28 in; C1 - Cup Flange Width:0.2188 in; T1 - Bearing Width:1.0939 in; Aa - Cage-Cone Backface Clearance:0.07 in; B - Cone Width:1.1542 in; T - Bearing Width to Flange:0.3440 in; Da - Cup Frontface Backing Diameter:3.96 in; |
H8-54N1 Rotek Slewing Ring Bearings | Enclosure:Open; Limiting Speed - Oil:14,000 rpm; Limiting Speed - Grease:12,000 rpm; Radial Clearance:0.035 to 0.060 mm; Static Load Rating:27,700 N; B:15 mm; dc (min):34 mm; Dynamic Load Rating:29,300 N; Fillet Radius/Chamfer:1 mm; r1:0.6 mm; Bore Type:Cylindrical Bore; Da (max):46 mm; db (max):31 mm; dd (min):37 mm; ra1 (max):0.6 mm; D:52 mm; db (min):30 mm; d:25 mm; Inside Ring Outside Diameter:31.5 mm; |
62.20.0400.000.11.1503 Standard 5 Slewing Ring Bearings | ra (max):2 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.050 to 0.080 mm; Dynamic Load Rating:550,000 N; Constant e:0.38; Da (max):158 mm; Retainer Material:Machined Brass; Roller Profile:Asymmetric; da (min):92 mm; Groove Width A:10 mm; Configuration:Double Row; Axial Load Factor Y1:1.75; d:80 mm; Axial Load Factor Y0:1.72; D:170 mm; B:58 mm; Nr. of Holes:4; Limiting Speed - Grease:4,050 rpm; |
3R13-62N1E Rotek Slewing Ring Bearings | Bearing Weight:23.8 Kg; Da - Outer Ring Backing Diameter:290.000 mm; R - Inner Ring To Clear Radius4:2.0 mm; Reference Thermal Speed Rating (Grease):1100; D:310 mm; Reference Thermal Speed Rating (Oil)2:1200; Tapered Bore:N; da - Inner Ring Backing Diameter:220.000 mm; d:200 mm; Cg - Geometry Factor3:0.1464; C - Inner Ring Width:82 mm; C - Dynamic Radial Rating1:924000 N; Design Units:METRIC; B - Outer Ring Width:82 mm; |
A19-111E1 Rotek Slewing Ring Bearings | Cup Part Number:JM716610; D:130.000 mm; C - Cup Width:24.000 mm; Db - Cup Backface Backing Diameter:117.09 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:161000 N; G1 - Heat Generation Factor (Roller-Raceway):117; R - Cone Backface To Clear Radius1:6.100 mm; e - ISO Factor8:0.44; Design Units:METRIC; Cg - Geometry Factor:0.13; Series:M716600; da - Cone Frontface Backing Diameter:91.95 mm; |
R8-35E3 Rotek Slewing Ring Bearings Video