| 231.20.0400.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | Float:0.083 in; Dimension BC:9.5 in; Y2 - Geometry Factor:4.31; Weight:23 lb; Grease Lubrication - T Seal:2000 rpm; e - Geometry Factor:0.23; Dimension F:8.38 in; Engineering Group:Mounted Bearing; Pre Install Clearance Min:0.0037 in; Oil Lubrication - M/N Seal:1400 rpm; Dimension L Exp:3.98 in; C - Dynamic Load (Basic):66900 lb; Dimension RVV:0.28 in; Oil Lubrication - B/C/O Seal:1100 rpm; Bearing Number:22217; |
| 3R6-71P9 Rotek Slewing Ring Bearings | d:1.2500 in; da - Cone Frontface Backing Diameter:1.54 in; K - Factor8:1.53; a - Effective Center Location4:-0.17 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Series:14000; Aa - Cage-Cone Backface Clearance:0.02 in; Cone Part Number:14125A; G1 - Heat Generation Factor (Roller-Raceway):18; C90 - Dynamic Radial Rating (90 million revolutions)5:3180 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:21400 lbf; |
| 60.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | d:560 mm; Da (max):792 mm; Axial Load Factor Y2:3.29; Center Guidance:Fixed Inner Ring Rib; D:820 mm; Hole Diameter (do):20 mm; Roller Profile:Symmetric; B:258 mm; Limiting Speed - Oil:520 rpm; Constant e:0.31; Weight:468.000 kg; Retainer Material:Machined Brass; Nr. of Holes:8; Fillet Radius/Chamfer:6 mm; Axial Load Factor Y1:2.21; Groove Width A:45 mm; Axial Load Factor Y0:2.16; Static Load Rating:13,500,000 N; |
| A8-25N2 Rotek Slewing Ring Bearings | E:2.072 in; D1:0.070 in; H:0.151 in; D:0.385 in; Major Dia - d:1.767 in; C:2.827 in; G:0.490 in; Threads No. per Inch:18; |
| 3R13-122N1B Rotek Slewing Ring Bearings | T - Bearing Width across Cups:1.3305 in; D:2.4402 in; Aa - Cage-Cone Backface Clearance:0 in; Y2 - ISO Factor10:2.63; G1 - Heat Generation Factor (Roller-Raceway)11:11.8; Cage Type:Stamped Steel; Design Units:Imperial; Cg - Geometry Factor12:0.0579; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:4390 lbf; Ab - Cage-Cone Frontface Clearance:0.1 in; r - Cup Backface To Clear Radius2:0.06 in; |
| H8-58E2 Rotek Slewing Ring Bearings | Radial Clearance:0.050 to 0.090 mm; db (max):168 mm; B:72 mm; da (min):142 mm; Enclosure:Open; Limiting Speed - Oil:2,400 rpm; Db (max):262 mm; Dynamic Load Rating:675,000 N; r1:5 mm; dd (min):190 mm; db (min):142 mm; D:310 mm; Da (max):288 mm; ra (max):4 mm; Outside Ring Inside Diameter:260 mm; Fillet Radius/Chamfer:5 mm; Bore Type:Cylindrical Bore; d:120 mm; Db (min):288 mm; Configuration:Single Row; |
| A8-39E12 Rotek Slewing Ring Bearings | Bearing Number:22217; Adapter Sleeve Axial Movement Min:0.027 in; Dimension J (Bolt Size):0.750 in; Dimension D Max:11.00 in; Eng Internal Radial Clearance - Max:0.0055; e - Geometry Factor:0.22; Pre Install Clearance Max:0.0055 in; Dimension G:3.0000 in; Grease Lubrication - M/N Seal:1400 rpm; Pre Install Clearance Min:0.0043 in; Shaft Size Type:Imperial; Dimension S:3.23 in; Engineering Group:Mounted Bearing; |
| A10-47E1 Rotek Slewing Ring Bearings | r1:1.1 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:4,200 rpm; Fillet Radius/Chamfer:3 mm; Enclosure:Open; Dynamic Load Rating:148,000 N; d:90 mm; Configuration:Single Row; Limiting Speed - Grease:3,100 rpm; a:37.2 mm; B:43 mm; Static Load Rating:124,000 N; D:190 mm; Weight:5.640 kg; |